Bazı yöntemler kullanarak, bir tablonun kopyasını oluşturduğunuzda indeksleri, PK, FK vb. Kaybedersiniz. Örneğin, SQL Server'da şunu söyleyebilirim:
select * into dbo.table2 from dbo.table1;Bu sadece tablonun basit bir kopyasıdır; tüm dizinler / kısıtlamalar eksik. Bir tablo yapısını (yedek kullanmadan) nasıl kopyalayabilirim?
Öncelikle bunu el ile yapmak istiyorum, ancak bu mümkün değilse herhangi bir çözümü kabul edeceğim.
Yanıtlar:
Elbette UI kullanarak nispeten kolay bir tablo komut dosyası olabilir:
Bu bir CREATE TABLEbetik çıkartacaktır ve yalnızca eski adı yeni adla aramanız ve değiştirmeniz gerekir (ve yeni adı olan bir nesnenin zaten mevcut olmadığını doğrulayın).
Ancak bunu otomatikleştirmeye çalışıyorsanız (örneğin, kod içinde tablo oluşturma komut dosyasını oluşturun), biraz daha zahmetlidir. Yukarıdaki komut dosyası seçeneği yalnızca DDL'nin tamamını CREATE TABLEmeta verilerindeki tek bir konumdan çekmiyor ; Sonunda CREATE TABLEsenaryoyu oluşturmak için koddaki sahnelerin arkasında bir sürü sihir yapar (verilerini nereden aldığını görmek için Profiler'ı kullanabilirsiniz, ancak nasıl topladığını göremezsiniz). Bunun için bir seçenek önerdim:
http://connect.microsoft.com/SQLServer/feedback/details/273934
Ancak bu çok az oyla karşılandı ve hızla Microsoft tarafından vuruldu. Şema oluşturmak için bir 3. parti aracı kullanmayı çok daha faydalı bulabilirsiniz (bunun hakkında blog yazdım ).
SQL Server 2012’de, 2005, 2008 ve 2008 R2’de yapmanız gereken işlerden daha yakın olmanızı sağlayan, meta verilerden sütun bilgisini bir araya getiren (örneğin, çok fazla uyarı varsa) yeni meta veri işlevleri vardır. Ondalık hassasiyet / ölçek eklemek zorundasınız, eğer [n [var [char]] uzunluk özelliğini eklemek zorundaysanız, n [var] char ise max_length kısmını yarıya indirmek zorunda kalırsanız, eğer bir MAX ise -1 ile MAX arasında değişiklik yapın, vb.). SQL Server 2012'de bu kısım biraz daha kolay:
SELECT name, system_type_name, is_nullable FROM
sys.dm_exec_describe_first_result_set('select * from sys.objects', NULL, 0)
Sonuçlar:
name system_type_name is_nullable
-------------------- ---------------- -----------
name nvarchar(128) 0
object_id int 0
principal_id int 1
schema_id int 0
parent_object_id int 0
type char(2) 0
type_desc nvarchar(60) 1
create_date datetime 0
modify_date datetime 0
is_ms_shipped bit 0
is_published bit 0
is_schema_published bit 0
Muhtemelen bu, hedeflenen CREATE TABLEifadenize kullanarak karmaşık bir yaklaşımdan çok daha yakındır sys.columns, ancak yine de yapılacak çok iş var. Anahtarlar, kısıtlamalar, satır seçeneklerinde metin, dosya grubu bilgileri, sıkıştırma ayarları, indeksler vb. kullanılan analoji, tekerleği yeniden icat.
Bunların hepsi, bunu kod aracılığıyla yapmanız gerekiyorsa, ancak SQL Server dışında yapabiliyorsanız, SMO / PowerShell'i düşünebilirsiniz. Bkz bu uç ve Scripter.Script () metodu .
otomatik olarak her şeyi, pk, fk, bölümleri, kısıtlamaları içeren şema oluşturmak için bu sp yazdım ...
ÖNEMLİ!! idamdan önce
create type TestTableType as table (ObjectID int)burada SP:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
--*************************************************************************************************'
-- La procedura crea lo script di una tabella
-- Tabella : xxxxx
-- Creata da : E.Mantovanelli
-- Data creazione : 28-06-2012
-- Data modifica: 28-06-2012
--*************************************************************************************************'
/*
-- ID----|-----Data-----|-- User --------- | ---- Note
20-11-2013 E.Mantovanelli distinzione schema delle tabelle
estrazione da db selezionato
aggiunta estrazione partizione
*/
CREATE PROCEDURE [dbo].[util_ScriptTable]
@DBName SYSNAME
,@schema sysname
,@TableName SYSNAME
,@IncludeConstraints BIT = 1
,@IncludeIndexes BIT = 1
,@NewTableSchema sysname
,@NewTableName SYSNAME = NULL
,@UseSystemDataTypes BIT = 0
,@script varchar(max) output
AS
BEGIN try
if not exists (select * from sys.types where name = 'TestTableType')
create type TestTableType as table (ObjectID int)--drop type TestTableType
declare @sql nvarchar(max)
DECLARE @MainDefinition TABLE (FieldValue VARCHAR(200))
--DECLARE @DBName SYSNAME
DECLARE @ClusteredPK BIT
DECLARE @TableSchema NVARCHAR(255)
--SET @DBName = DB_NAME(DB_ID())
SELECT @TableName = name FROM sysobjects WHERE id = OBJECT_ID(@TableName)
DECLARE @ShowFields TABLE (FieldID INT IDENTITY(1,1)
,DatabaseName VARCHAR(100)
,TableOwner VARCHAR(100)
,TableName VARCHAR(100)
,FieldName VARCHAR(100)
,ColumnPosition INT
,ColumnDefaultValue VARCHAR(100)
,ColumnDefaultName VARCHAR(100)
,IsNullable BIT
,DataType VARCHAR(100)
,MaxLength varchar(10)
,NumericPrecision INT
,NumericScale INT
,DomainName VARCHAR(100)
,FieldListingName VARCHAR(110)
,FieldDefinition CHAR(1)
,IdentityColumn BIT
,IdentitySeed INT
,IdentityIncrement INT
,IsCharColumn BIT
,IsComputed varchar(255))
DECLARE @HoldingArea TABLE(FldID SMALLINT IDENTITY(1,1)
,Flds VARCHAR(4000)
,FldValue CHAR(1) DEFAULT(0))
DECLARE @PKObjectID TABLE(ObjectID INT)
DECLARE @Uniques TABLE(ObjectID INT)
DECLARE @HoldingAreaValues TABLE(FldID SMALLINT IDENTITY(1,1)
,Flds VARCHAR(4000)
,FldValue CHAR(1) DEFAULT(0))
DECLARE @Definition TABLE(DefinitionID SMALLINT IDENTITY(1,1)
,FieldValue VARCHAR(200))
set @sql=
'
use '+@DBName+'
SELECT distinct DB_NAME()
,TABLE_SCHEMA
,TABLE_NAME
,''[''+COLUMN_NAME+'']'' as COLUMN_NAME
,CAST(ORDINAL_POSITION AS INT)
,COLUMN_DEFAULT
,dobj.name AS ColumnDefaultName
,CASE WHEN c.IS_NULLABLE = ''YES'' THEN 1 ELSE 0 END
,DATA_TYPE
,case CHARACTER_MAXIMUM_LENGTH when -1 then ''max'' else CAST(CHARACTER_MAXIMUM_LENGTH AS varchar) end--CAST(CHARACTER_MAXIMUM_LENGTH AS INT)
,CAST(NUMERIC_PRECISION AS INT)
,CAST(NUMERIC_SCALE AS INT)
,DOMAIN_NAME
,COLUMN_NAME + '',''
,'''' AS FieldDefinition
,CASE WHEN ic.object_id IS NULL THEN 0 ELSE 1 END AS IdentityColumn
,CAST(ISNULL(ic.seed_value,0) AS INT) AS IdentitySeed
,CAST(ISNULL(ic.increment_value,0) AS INT) AS IdentityIncrement
,CASE WHEN st.collation_name IS NOT NULL THEN 1 ELSE 0 END AS IsCharColumn
,cc.definition
FROM INFORMATION_SCHEMA.COLUMNS c
JOIN sys.columns sc ON c.TABLE_NAME = OBJECT_NAME(sc.object_id) AND c.COLUMN_NAME = sc.Name
LEFT JOIN sys.identity_columns ic ON c.TABLE_NAME = OBJECT_NAME(ic.object_id) AND c.COLUMN_NAME = ic.Name
JOIN sys.types st ON COALESCE(c.DOMAIN_NAME,c.DATA_TYPE) = st.name
LEFT OUTER JOIN sys.objects dobj ON dobj.object_id = sc.default_object_id AND dobj.type = ''D''
left join sys.computed_columns cc on c.TABLE_NAME=OBJECT_NAME(cc.object_id) and sc.column_id=cc.column_id
WHERE c.TABLE_NAME = @TableName and c.TABLE_SCHEMA=@schema
ORDER BY c.TABLE_NAME, c.ORDINAL_POSITION
'
print @sql
INSERT INTO @ShowFields( DatabaseName
,TableOwner
,TableName
,FieldName
,ColumnPosition
,ColumnDefaultValue
,ColumnDefaultName
,IsNullable
,DataType
,MaxLength
,NumericPrecision
,NumericScale
,DomainName
,FieldListingName
,FieldDefinition
,IdentityColumn
,IdentitySeed
,IdentityIncrement
,IsCharColumn
,IsComputed)
exec sp_executesql @sql,
N'@TableName varchar(50),@schema varchar(50)',
@TableName=@TableName,@schema=@schema
/*
SELECT @DBName--DB_NAME()
,TABLE_SCHEMA
,TABLE_NAME
,COLUMN_NAME
,CAST(ORDINAL_POSITION AS INT)
,COLUMN_DEFAULT
,dobj.name AS ColumnDefaultName
,CASE WHEN c.IS_NULLABLE = 'YES' THEN 1 ELSE 0 END
,DATA_TYPE
,CAST(CHARACTER_MAXIMUM_LENGTH AS INT)
,CAST(NUMERIC_PRECISION AS INT)
,CAST(NUMERIC_SCALE AS INT)
,DOMAIN_NAME
,COLUMN_NAME + ','
,'' AS FieldDefinition
,CASE WHEN ic.object_id IS NULL THEN 0 ELSE 1 END AS IdentityColumn
,CAST(ISNULL(ic.seed_value,0) AS INT) AS IdentitySeed
,CAST(ISNULL(ic.increment_value,0) AS INT) AS IdentityIncrement
,CASE WHEN st.collation_name IS NOT NULL THEN 1 ELSE 0 END AS IsCharColumn
FROM INFORMATION_SCHEMA.COLUMNS c
JOIN sys.columns sc ON c.TABLE_NAME = OBJECT_NAME(sc.object_id) AND c.COLUMN_NAME = sc.Name
LEFT JOIN sys.identity_columns ic ON c.TABLE_NAME = OBJECT_NAME(ic.object_id) AND c.COLUMN_NAME = ic.Name
JOIN sys.types st ON COALESCE(c.DOMAIN_NAME,c.DATA_TYPE) = st.name
LEFT OUTER JOIN sys.objects dobj ON dobj.object_id = sc.default_object_id AND dobj.type = 'D'
WHERE c.TABLE_NAME = @TableName
ORDER BY c.TABLE_NAME, c.ORDINAL_POSITION
*/
SELECT TOP 1 @TableSchema = TableOwner FROM @ShowFields
INSERT INTO @HoldingArea (Flds) VALUES('(')
INSERT INTO @Definition(FieldValue)VALUES('CREATE TABLE ' + CASE WHEN @NewTableName IS NOT NULL THEN @DBName + '.' + @NewTableSchema + '.' + @NewTableName ELSE @DBName + '.' + @TableSchema + '.' + @TableName END)
INSERT INTO @Definition(FieldValue)VALUES('(')
INSERT INTO @Definition(FieldValue)
SELECT CHAR(10) + FieldName + ' ' +
--CASE WHEN DomainName IS NOT NULL AND @UseSystemDataTypes = 0 THEN DomainName + CASE WHEN IsNullable = 1 THEN ' NULL ' ELSE ' NOT NULL ' END ELSE UPPER(DataType) +CASE WHEN IsCharColumn = 1 THEN '(' + CAST(MaxLength AS VARCHAR(10)) + ')' ELSE '' END +CASE WHEN IdentityColumn = 1 THEN ' IDENTITY(' + CAST(IdentitySeed AS VARCHAR(5))+ ',' + CAST(IdentityIncrement AS VARCHAR(5)) + ')' ELSE '' END +CASE WHEN IsNullable = 1 THEN ' NULL ' ELSE ' NOT NULL ' END +CASE WHEN ColumnDefaultName IS NOT NULL AND @IncludeConstraints = 1 THEN 'CONSTRAINT [' + ColumnDefaultName + '] DEFAULT' + UPPER(ColumnDefaultValue) ELSE '' END END + CASE WHEN FieldID = (SELECT MAX(FieldID) FROM @ShowFields) THEN '' ELSE ',' END
CASE WHEN DomainName IS NOT NULL AND @UseSystemDataTypes = 0 THEN DomainName +
CASe WHEN IsNullable = 1 THEN ' NULL '
ELSE ' NOT NULL '
END
ELSE
case when IsComputed is null then
UPPER(DataType) +
CASE WHEN IsCharColumn = 1 THEN '(' + CAST(MaxLength AS VARCHAR(10)) + ')'
ELSE
CASE WHEN DataType = 'numeric' THEN '(' + CAST(NumericPrecision AS VARCHAR(10))+','+ CAST(NumericScale AS VARCHAR(10)) + ')'
ELSE
CASE WHEN DataType = 'decimal' THEN '(' + CAST(NumericPrecision AS VARCHAR(10))+','+ CAST(NumericScale AS VARCHAR(10)) + ')'
ELSE ''
end
end
END +
CASE WHEN IdentityColumn = 1 THEN ' IDENTITY(' + CAST(IdentitySeed AS VARCHAR(5))+ ',' + CAST(IdentityIncrement AS VARCHAR(5)) + ')'
ELSE ''
END +
CASE WHEN IsNullable = 1 THEN ' NULL '
ELSE ' NOT NULL '
END +
CASE WHEN ColumnDefaultName IS NOT NULL AND @IncludeConstraints = 1 THEN 'CONSTRAINT [' + replace(ColumnDefaultName,@TableName,@NewTableName) + '] DEFAULT' + UPPER(ColumnDefaultValue)
ELSE ''
END
else
' as '+IsComputed+' '
end
END +
CASE WHEN FieldID = (SELECT MAX(FieldID) FROM @ShowFields) THEN ''
ELSE ','
END
FROM @ShowFields
IF @IncludeConstraints = 1
BEGIN
set @sql=
'
use '+@DBName+'
SELECT distinct '',CONSTRAINT ['' + replace(name,@TableName,@NewTableName) + ''] FOREIGN KEY ('' + ParentColumns + '') REFERENCES ['' + ReferencedObject + '']('' + ReferencedColumns + '')''
FROM ( SELECT ReferencedObject = OBJECT_NAME(fk.referenced_object_id), ParentObject = OBJECT_NAME(parent_object_id),fk.name
, REVERSE(SUBSTRING(REVERSE(( SELECT cp.name + '',''
FROM sys.foreign_key_columns fkc
JOIN sys.columns cp ON fkc.parent_object_id = cp.object_id AND fkc.parent_column_id = cp.column_id
WHERE fkc.constraint_object_id = fk.object_id FOR XML PATH('''') )), 2, 8000)) ParentColumns,
REVERSE(SUBSTRING(REVERSE(( SELECT cr.name + '',''
FROM sys.foreign_key_columns fkc
JOIN sys.columns cr ON fkc.referenced_object_id = cr.object_id AND fkc.referenced_column_id = cr.column_id
WHERE fkc.constraint_object_id = fk.object_id FOR XML PATH('''') )), 2, 8000)) ReferencedColumns
FROM sys.foreign_keys fk
inner join sys.schemas s on fk.schema_id=s.schema_id and s.name=@schema) a
WHERE ParentObject = @TableName
'
print @sql
INSERT INTO @Definition(FieldValue)
exec sp_executesql @sql,
N'@TableName varchar(50),@NewTableName varchar(50),@schema varchar(50)',
@TableName=@TableName,@NewTableName=@NewTableName,@schema=@schema
/*
SELECT ',CONSTRAINT [' + name + '] FOREIGN KEY (' + ParentColumns + ') REFERENCES [' + ReferencedObject + '](' + ReferencedColumns + ')'
FROM ( SELECT ReferencedObject = OBJECT_NAME(fk.referenced_object_id), ParentObject = OBJECT_NAME(parent_object_id),fk.name
, REVERSE(SUBSTRING(REVERSE(( SELECT cp.name + ','
FROM sys.foreign_key_columns fkc
JOIN sys.columns cp ON fkc.parent_object_id = cp.object_id AND fkc.parent_column_id = cp.column_id
WHERE fkc.constraint_object_id = fk.object_id FOR XML PATH('') )), 2, 8000)) ParentColumns,
REVERSE(SUBSTRING(REVERSE(( SELECT cr.name + ','
FROM sys.foreign_key_columns fkc
JOIN sys.columns cr ON fkc.referenced_object_id = cr.object_id AND fkc.referenced_column_id = cr.column_id
WHERE fkc.constraint_object_id = fk.object_id FOR XML PATH('') )), 2, 8000)) ReferencedColumns
FROM sys.foreign_keys fk ) a
WHERE ParentObject = @TableName
*/
set @sql=
'
use '+@DBName+'
SELECT distinct '',CONSTRAINT ['' + replace(c.name,@TableName,@NewTableName) + ''] CHECK '' + definition
FROM sys.check_constraints c join sys.schemas s on c.schema_id=s.schema_id and s.name=@schema
WHERE OBJECT_NAME(parent_object_id) = @TableName
'
print @sql
INSERT INTO @Definition(FieldValue)
exec sp_executesql @sql,
N'@TableName varchar(50),@NewTableName varchar(50),@schema varchar(50)',
@TableName=@TableName,@NewTableName=@NewTableName,@schema=@schema
/*
SELECT ',CONSTRAINT [' + name + '] CHECK ' + definition FROM sys.check_constraints
WHERE OBJECT_NAME(parent_object_id) = @TableName
*/
set @sql=
'
use '+@DBName+'
SELECT DISTINCT PKObject = cco.object_id
FROM sys.key_constraints cco
JOIN sys.index_columns cc ON cco.parent_object_id = cc.object_id AND cco.unique_index_id = cc.index_id
JOIN sys.indexes i ON cc.object_id = i.object_id AND cc.index_id = i.index_id
join sys.schemas s on cco.schema_id=s.schema_id and s.name=@schema
WHERE OBJECT_NAME(parent_object_id) = @TableName AND i.type = 1 AND is_primary_key = 1
'
print @sql
INSERT INTO @PKObjectID(ObjectID)
exec sp_executesql @sql,
N'@TableName varchar(50),@schema varchar(50)',
@TableName=@TableName,@schema=@schema
/*
SELECT DISTINCT PKObject = cco.object_id
FROM sys.key_constraints cco
JOIN sys.index_columns cc ON cco.parent_object_id = cc.object_id AND cco.unique_index_id = cc.index_id
JOIN sys.indexes i ON cc.object_id = i.object_id AND cc.index_id = i.index_id
WHERE OBJECT_NAME(parent_object_id) = @TableName AND i.type = 1 AND is_primary_key = 1
*/
set @sql=
'
use '+@DBName+'
SELECT DISTINCT PKObject = cco.object_id
FROM sys.key_constraints cco
JOIN sys.index_columns cc ON cco.parent_object_id = cc.object_id AND cco.unique_index_id = cc.index_id
JOIN sys.indexes i ON cc.object_id = i.object_id AND cc.index_id = i.index_id
join sys.schemas s on cco.schema_id=s.schema_id and s.name=@schema
WHERE OBJECT_NAME(parent_object_id) = @TableName AND i.type = 2 AND is_primary_key = 0 AND is_unique_constraint = 1
'
print @sql
INSERT INTO @Uniques(ObjectID)
exec sp_executesql @sql,
N'@TableName varchar(50),@schema varchar(50)',
@TableName=@TableName,@schema=@schema
/*
SELECT DISTINCT PKObject = cco.object_id
FROM sys.key_constraints cco
JOIN sys.index_columns cc ON cco.parent_object_id = cc.object_id AND cco.unique_index_id = cc.index_id
JOIN sys.indexes i ON cc.object_id = i.object_id AND cc.index_id = i.index_id
WHERE OBJECT_NAME(parent_object_id) = @TableName AND i.type = 2 AND is_primary_key = 0 AND is_unique_constraint = 1
*/
SET @ClusteredPK = CASE WHEN @@ROWCOUNT > 0 THEN 1 ELSE 0 END
declare @t TestTableType
insert @t select * from @PKObjectID
declare @u TestTableType
insert @u select * from @Uniques
set @sql=
'
use '+@DBName+'
SELECT distinct '',CONSTRAINT '' + replace(cco.name,@TableName,@NewTableName) + CASE type WHEN ''PK'' THEN '' PRIMARY KEY '' + CASE WHEN pk.ObjectID IS NULL THEN '' NONCLUSTERED '' ELSE '' CLUSTERED '' END WHEN ''UQ'' THEN '' UNIQUE '' END + CASE WHEN u.ObjectID IS NOT NULL THEN '' NONCLUSTERED '' ELSE '''' END
+ ''(''+REVERSE(SUBSTRING(REVERSE(( SELECT c.name + + CASE WHEN cc.is_descending_key = 1 THEN '' DESC'' ELSE '' ASC'' END + '',''
FROM sys.key_constraints ccok
LEFT JOIN sys.index_columns cc ON ccok.parent_object_id = cc.object_id AND cco.unique_index_id = cc.index_id
LEFT JOIN sys.columns c ON cc.object_id = c.object_id AND cc.column_id = c.column_id
LEFT JOIN sys.indexes i ON cc.object_id = i.object_id AND cc.index_id = i.index_id
WHERE i.object_id = ccok.parent_object_id AND ccok.object_id = cco.object_id
order by key_ordinal FOR XML PATH(''''))), 2, 8000)) + '')''
FROM sys.key_constraints cco
inner join sys.schemas s on cco.schema_id=s.schema_id and s.name=@schema
LEFT JOIN @U u ON cco.object_id = u.objectID
LEFT JOIN @t pk ON cco.object_id = pk.ObjectID
WHERE OBJECT_NAME(cco.parent_object_id) = @TableName
'
print @sql
INSERT INTO @Definition(FieldValue)
exec sp_executesql @sql,
N'@TableName varchar(50),@NewTableName varchar(50),@schema varchar(50),@t TestTableType readonly,@u TestTableType readonly',
@TableName=@TableName,@NewTableName=@NewTableName,@schema=@schema,@t=@t,@u=@u
/*
SELECT ',CONSTRAINT ' + name + CASE type WHEN 'PK' THEN ' PRIMARY KEY ' + CASE WHEN pk.ObjectID IS NULL THEN ' NONCLUSTERED ' ELSE ' CLUSTERED ' END WHEN 'UQ' THEN ' UNIQUE ' END + CASE WHEN u.ObjectID IS NOT NULL THEN ' NONCLUSTERED ' ELSE '' END
+ '(' +REVERSE(SUBSTRING(REVERSE(( SELECT c.name + + CASE WHEN cc.is_descending_key = 1 THEN ' DESC' ELSE ' ASC' END + ','
FROM sys.key_constraints ccok
LEFT JOIN sys.index_columns cc ON ccok.parent_object_id = cc.object_id AND cco.unique_index_id = cc.index_id
LEFT JOIN sys.columns c ON cc.object_id = c.object_id AND cc.column_id = c.column_id
LEFT JOIN sys.indexes i ON cc.object_id = i.object_id AND cc.index_id = i.index_id
WHERE i.object_id = ccok.parent_object_id AND ccok.object_id = cco.object_id FOR XML PATH(''))), 2, 8000)) + ')'
FROM sys.key_constraints cco
LEFT JOIN @PKObjectID pk ON cco.object_id = pk.ObjectID
LEFT JOIN @Uniques u ON cco.object_id = u.objectID
WHERE OBJECT_NAME(cco.parent_object_id) = @TableName
*/
END
INSERT INTO @Definition(FieldValue) VALUES(')')
set @sql=
'
use '+@DBName+'
select '' on '' + d.name + ''([''+c.name+''])''
from sys.tables t join sys.indexes i on(i.object_id = t.object_id and i.index_id < 2)
join sys.index_columns ic on(ic.partition_ordinal > 0 and ic.index_id = i.index_id and ic.object_id = t.object_id)
join sys.columns c on(c.object_id = ic.object_id and c.column_id = ic.column_id)
join sys.schemas s on t.schema_id=s.schema_id
join sys.data_spaces d on i.data_space_id=d.data_space_id
where t.name=@TableName and s.name=@schema
order by key_ordinal
'
print 'x'
print @sql
INSERT INTO @Definition(FieldValue)
exec sp_executesql @sql,
N'@TableName varchar(50),@schema varchar(50)',
@TableName=@TableName,@schema=@schema
IF @IncludeIndexes = 1
BEGIN
set @sql=
'
use '+@DBName+'
SELECT distinct '' CREATE '' + i.type_desc + '' INDEX ['' + replace(i.name COLLATE SQL_Latin1_General_CP1_CI_AS,@TableName,@NewTableName) + ''] ON '+@DBName+'.'+@NewTableSchema+'.'+@NewTableName+' (''
+ REVERSE(SUBSTRING(REVERSE(( SELECT name + CASE WHEN sc.is_descending_key = 1 THEN '' DESC'' ELSE '' ASC'' END + '',''
FROM sys.index_columns sc
JOIN sys.columns c ON sc.object_id = c.object_id AND sc.column_id = c.column_id
WHERE t.name=@TableName AND sc.object_id = i.object_id AND sc.index_id = i.index_id
and is_included_column=0
ORDER BY key_ordinal ASC FOR XML PATH('''') )), 2, 8000)) + '')''+
ISNULL( '' include (''+REVERSE(SUBSTRING(REVERSE(( SELECT name + '',''
FROM sys.index_columns sc
JOIN sys.columns c ON sc.object_id = c.object_id AND sc.column_id = c.column_id
WHERE t.name=@TableName AND sc.object_id = i.object_id AND sc.index_id = i.index_id
and is_included_column=1
ORDER BY key_ordinal ASC FOR XML PATH('''') )), 2, 8000))+'')'' ,'''')+''''
FROM sys.indexes i join sys.tables t on i.object_id=t.object_id
join sys.schemas s on t.schema_id=s.schema_id
AND CASE WHEN @ClusteredPK = 1 AND is_primary_key = 1 AND i.type = 1 THEN 0 ELSE 1 END = 1 AND is_unique_constraint = 0 AND is_primary_key = 0
where t.name=@TableName and s.name=@schema
'
print @sql
INSERT INTO @Definition(FieldValue)
exec sp_executesql @sql,
N'@TableName varchar(50),@NewTableName varchar(50),@schema varchar(50), @ClusteredPK bit',
@TableName=@TableName,@NewTableName=@NewTableName,@schema=@schema,@ClusteredPK=@ClusteredPK
END
/*
SELECT 'CREATE ' + type_desc + ' INDEX [' + [name] COLLATE SQL_Latin1_General_CP1_CI_AS + '] ON [' + OBJECT_NAME(object_id) + '] (' + REVERSE(SUBSTRING(REVERSE(( SELECT name + CASE WHEN sc.is_descending_key = 1 THEN ' DESC' ELSE ' ASC' END + ','
FROM sys.index_columns sc
JOIN sys.columns c ON sc.object_id = c.object_id AND sc.column_id = c.column_id
WHERE OBJECT_NAME(sc.object_id) = @TableName AND sc.object_id = i.object_id AND sc.index_id = i.index_id
ORDER BY index_column_id ASC FOR XML PATH('') )), 2, 8000)) + ')'
FROM sys.indexes i
WHERE OBJECT_NAME(object_id) = @TableName
AND CASE WHEN @ClusteredPK = 1 AND is_primary_key = 1 AND type = 1 THEN 0 ELSE 1 END = 1 AND is_unique_constraint = 0 AND is_primary_key = 0
*/
INSERT INTO @MainDefinition(FieldValue)
SELECT FieldValue FROM @Definition
ORDER BY DefinitionID ASC
----------------------------------
declare @q varchar(max)
set @q=(select replace((SELECT FieldValue FROM @MainDefinition FOR XML PATH('')),'</FieldValue>',''))
set @script=(select REPLACE(@q,'<FieldValue>',''))
--drop type TestTableType
END try
-- ##############################################################################################################################################################################
BEGIN CATCH
BEGIN
-- INIZIO Procedura in errore =========================================================================================================================================================
PRINT '***********************************************************************************************************************************************************'
PRINT 'ErrorNumber : ' + CAST(ERROR_NUMBER() AS NVARCHAR(MAX))
PRINT 'ErrorSeverity : ' + CAST(ERROR_SEVERITY() AS NVARCHAR(MAX))
PRINT 'ErrorState : ' + CAST(ERROR_STATE() AS NVARCHAR(MAX))
PRINT 'ErrorLine : ' + CAST(ERROR_LINE() AS NVARCHAR(MAX))
PRINT 'ErrorMessage : ' + CAST(ERROR_MESSAGE() AS NVARCHAR(MAX))
PRINT '***********************************************************************************************************************************************************'
-- FINE Procedura in errore =========================================================================================================================================================
END
set @script=''
return -1
END CATCH
-- ############################################################################################################################################################################## yürütmek için:
declare @s varchar(max)
exec [util_ScriptTable] 'db','schema_source','table_source',1,1,'schema_dest','tab_dest',0,@s output
select @sBu, bir duvara çivi koymak için bir kırıcı kullanıyor olabilir, ancak sorunun genişliğini göz önünde bulundurarak, bunun geçerli bir seçenek olduğunu düşünüyorum.
SQL Server 2012 SP4 +, 2014 SP2 + veya 2016 SP1 + kullanıyorsanız, DBCC CLONEDATABASEveritabanınızın yalnızca şemaya ait bir kopyasını veri tabanına göndererek kaldırabilirsiniz . Bu, birden fazla tablonun kapsamlı şema kopyalarını oluşturmak için idealdir ve bir dizi tablonun döngü döngüsünü "otomatikleştirme" ihtiyacını hafifletebilir, ancak tüm tablo kopyalarının yeni bir salt okunur veritabanında oluşturulacağı konusunda uyarılabilir .
Bu tablolar olacak yabancı anahtarlar, birincil anahtarlar, indeksler ve kısıtlamalar bulunmaktadır. Ayrıca, istatistikleri ve sorgu deposu verilerini de içerir (siz NO_STATISTICSve belirtmezseniz NO_QUERYSTORE).
Sözdizimi
DBCC CLONEDATABASE (source_database_name, target_database_name)[WITH [NO_STATISTICS][,NO_QUERYSTORE]] Ayrıca, Brent Ozar'ın görevini iyi bildiği birkaç farkındalık var. Ancak, inceliklerden herhangi birinin dağıtıcı olup olmadığına dair tabloların kopyalarını nasıl ve niçin oluşturmak istediğinizi gerçekten kaybediyoruz. .
Dizin, tetikleyiciler, yabancı anahtarlar vb. Dahil olmak üzere tablonuzu oluşturabilecek bir komut dosyası almak için SQL Server Management Studio'daki "Komut dosyası oluştur" komutunu kullanabilirsiniz.
SSMS’de
Hedef veritabanınıza tam ihtiyacınız olanı dahil etmek için daha sonra düzenleyebilirsiniz.
İşte bu yazıda E.Mantovanelli'nin yazdığı bir versiyon. Bu, benzersiz bir dizinin ortaya çıkan komut dosyasında UNIQUE anahtar sözcüğünü içermemesi sorununu düzeltir. Ayrıca, bir tablo Kümelenmemiş dizinler olmadan oluşturulabilir veya yalnızca kümelenmemiş dizinler için komut dosyası oluşturabilirsiniz. Bunu bir sahne tablosu oluşturmak için kullanıyorum, yükü Kümelenmemiş dizinleri ekledim, sonra yükün daha hızlı çalışmasını sağlayan ve dizinler parçalanmayan bir tablo anahtarı kullandım.
SET ANSI_NULLS ON;
GO
SET QUOTED_IDENTIFIER ON;
GO
--*************************************************************************************************'
-- La procedura crea lo script di una tabella
-- Tabella : xxxxx
-- Creata da : E.Mantovanelli
-- Data creazione : 28-06-2012
-- Data modifica: 28-06-2012
--*************************************************************************************************'
/*
-- ID----|-----Data-----|-- User --------- | ---- Note
20-11-2013 E.Mantovanelli distinzione schema delle tabelle
estrazione da db selezionato
aggiunta estrazione partizione
*/
--*************************************************************************************************'
-- Creates a copy of a table with optionally all indexes and constraints depending on parameters
-- Updated by : Brent Willis
-- Date Updated : 09-11-2019
-- Changes: Added the ability to create a table with clustered index and constraints only or to
-- CREATE just the non-clustered indexes. This is helpful so a table can be created,
-- loaded then non-clusted indexes added so it can them be swapped into a partitioned
-- table with freshly created indexes to lower fragmentation.
--
-- Also fixed an issue when a unique index was defined the index resulting table was not unique.
--*************************************************************************************************'
ALTER PROCEDURE dbo.util_ScriptTable
@DBName sysname
, @schema sysname
, @TableName sysname
, @includeTable Bit = 1
, @IncludeConstraints Bit = 1
, @IncludeClusteredIndex Bit = 1
, @IncludeIndexes Bit = 1
, @NewTableSchema sysname
, @NewTableName sysname = NULL
, @UseSystemDataTypes Bit = 0
, @script Varchar(MAX) OUTPUT
AS
BEGIN TRY
IF NOT EXISTS (SELECT * FROM sys.types WHERE name = 'TestTableType')
CREATE TYPE TestTableType AS TABLE (ObjectID Int); --drop type TestTableType
DECLARE @sql NVarchar(MAX);
DECLARE @MainDefinition Table (FieldValue Varchar(200));
--DECLARE @DBName SYSNAME
DECLARE @ClusteredPK Bit;
DECLARE @TableSchema NVarchar(255);
--SET @DBName = DB_NAME(DB_ID())
SELECT @TableName = name FROM sys.sysobjects WHERE id = Object_Id(@TableName);
DECLARE @ShowFields Table (FieldID Int IDENTITY(1, 1)
, DatabaseName Varchar(100)
, TableOwner Varchar(100)
, TableName Varchar(100)
, FieldName Varchar(100)
, ColumnPosition Int
, ColumnDefaultValue Varchar(100)
, ColumnDefaultName Varchar(100)
, IsNullable Bit
, DataType Varchar(100)
, MaxLength Varchar(10)
, NumericPrecision Int
, NumericScale Int
, DomainName Varchar(100)
, FieldListingName Varchar(110)
, FieldDefinition Char(1)
, IdentityColumn Bit
, IdentitySeed Int
, IdentityIncrement Int
, IsCharColumn Bit
, IsComputed Varchar(255));
DECLARE @HoldingArea Table (FldID SmallInt IDENTITY(1, 1), Flds Varchar(4000), FldValue Char(1) DEFAULT (0));
DECLARE @PKObjectID Table (ObjectID Int);
DECLARE @Uniques Table (ObjectID Int);
DECLARE @Definition Table (DefinitionID SmallInt IDENTITY(1, 1), FieldValue Varchar(2000));
SET @sql = N'
use ' + @DBName + N'
SELECT distinct DB_NAME()
,TABLE_SCHEMA
,TABLE_NAME
,''[''+COLUMN_NAME+'']'' as COLUMN_NAME
,CAST(ORDINAL_POSITION AS INT)
,COLUMN_DEFAULT
,dobj.name AS ColumnDefaultName
,CASE WHEN c.IS_NULLABLE = ''YES'' THEN 1 ELSE 0 END
,DATA_TYPE
,case CHARACTER_MAXIMUM_LENGTH when -1 then ''max'' else CAST(CHARACTER_MAXIMUM_LENGTH AS varchar) end--CAST(CHARACTER_MAXIMUM_LENGTH AS INT)
,CAST(NUMERIC_PRECISION AS INT)
,CAST(NUMERIC_SCALE AS INT)
,DOMAIN_NAME
,COLUMN_NAME + '',''
,'''' AS FieldDefinition
,CASE WHEN ic.object_id IS NULL THEN 0 ELSE 1 END AS IdentityColumn
,CAST(ISNULL(ic.seed_value,0) AS INT) AS IdentitySeed
,CAST(ISNULL(ic.increment_value,0) AS INT) AS IdentityIncrement
,CASE WHEN st.collation_name IS NOT NULL THEN 1 ELSE 0 END AS IsCharColumn
,cc.definition
FROM INFORMATION_SCHEMA.COLUMNS c
JOIN sys.columns sc ON c.TABLE_NAME = OBJECT_NAME(sc.object_id) AND c.COLUMN_NAME = sc.Name
LEFT JOIN sys.identity_columns ic ON c.TABLE_NAME = OBJECT_NAME(ic.object_id) AND c.COLUMN_NAME = ic.Name
JOIN sys.types st ON COALESCE(c.DOMAIN_NAME,c.DATA_TYPE) = st.name
LEFT OUTER JOIN sys.objects dobj ON dobj.object_id = sc.default_object_id AND dobj.type = ''D''
left join sys.computed_columns cc on c.TABLE_NAME=OBJECT_NAME(cc.object_id) and sc.column_id=cc.column_id
WHERE c.TABLE_NAME = @TableName and c.TABLE_SCHEMA=@schema
ORDER BY c.TABLE_NAME, c.ORDINAL_POSITION
' ;
--PRINT @sql;
INSERT INTO @ShowFields (DatabaseName
, TableOwner
, TableName
, FieldName
, ColumnPosition
, ColumnDefaultValue
, ColumnDefaultName
, IsNullable
, DataType
, MaxLength
, NumericPrecision
, NumericScale
, DomainName
, FieldListingName
, FieldDefinition
, IdentityColumn
, IdentitySeed
, IdentityIncrement
, IsCharColumn
, IsComputed)
EXEC sys.sp_executesql @sql
, N'@TableName varchar(50),@schema varchar(50)'
, @TableName = @TableName
, @schema = @schema;
SELECT TOP 1 @TableSchema = TableOwner FROM @ShowFields;
INSERT INTO @HoldingArea (Flds) VALUES ('(');
IF @includeTable = 1
BEGIN
INSERT INTO @Definition (FieldValue)
VALUES
( 'CREATE TABLE ' + CASE
WHEN @NewTableName IS NOT NULL THEN
@DBName + '.' + @NewTableSchema + '.' + @NewTableName
ELSE
@DBName + '.' + @TableSchema + '.' + @TableName
END);
INSERT INTO @Definition (FieldValue) VALUES ('(');
INSERT INTO @Definition (FieldValue)
SELECT Char(10) + FieldName + ' '
+ CASE
WHEN DomainName IS NOT NULL AND @UseSystemDataTypes = 0 THEN
DomainName + CASE WHEN IsNullable = 1 THEN ' NULL ' ELSE ' NOT NULL ' END
ELSE
CASE
WHEN IsComputed IS NULL THEN
Upper(DataType)
+ CASE
WHEN IsCharColumn = 1 THEN
'(' + Cast(MaxLength AS Varchar(10)) + ')'
ELSE
CASE
WHEN DataType = 'numeric' THEN
'(' + Cast(NumericPrecision AS Varchar(10)) + ','
+ Cast(NumericScale AS Varchar(10)) + ')'
ELSE
CASE
WHEN DataType = 'decimal' THEN
'(' + Cast(NumericPrecision AS Varchar(10)) + ','
+ Cast(NumericScale AS Varchar(10)) + ')'
ELSE
''
END
END
END
+ CASE
WHEN IdentityColumn = 1 THEN
' IDENTITY(' + Cast(IdentitySeed AS Varchar(5)) + ','
+ Cast(IdentityIncrement AS Varchar(5)) + ')'
ELSE
''
END + CASE WHEN IsNullable = 1 THEN ' NULL ' ELSE ' NOT NULL ' END
+ CASE
WHEN ColumnDefaultName IS NOT NULL AND @IncludeConstraints = 1 THEN
'CONSTRAINT ['
+ Replace(ColumnDefaultName, @TableName, @NewTableName)
+ '] DEFAULT' + Upper(ColumnDefaultValue)
ELSE
''
END
ELSE
' as ' + IsComputed + ' '
END
END + CASE
WHEN FieldID = (SELECT Max(FieldID)FROM @ShowFields) THEN
''
ELSE
','
END
FROM @ShowFields;
--------------------------------------------------
IF @IncludeConstraints = 1
BEGIN
SET @sql = N'
use ' + @DBName + N'
SELECT distinct '',CONSTRAINT ['' + replace(name,@TableName,@NewTableName) + ''] FOREIGN KEY ('' + ParentColumns + '') REFERENCES ['' + ReferencedObject + '']('' + ReferencedColumns + '')''
FROM ( SELECT ReferencedObject = OBJECT_NAME(fk.referenced_object_id), ParentObject = OBJECT_NAME(parent_object_id),fk.name
, REVERSE(SUBSTRING(REVERSE(( SELECT cp.name + '',''
FROM sys.foreign_key_columns fkc
JOIN sys.columns cp ON fkc.parent_object_id = cp.object_id AND fkc.parent_column_id = cp.column_id
WHERE fkc.constraint_object_id = fk.object_id FOR XML PATH('''') )), 2, 8000)) ParentColumns,
REVERSE(SUBSTRING(REVERSE(( SELECT cr.name + '',''
FROM sys.foreign_key_columns fkc
JOIN sys.columns cr ON fkc.referenced_object_id = cr.object_id AND fkc.referenced_column_id = cr.column_id
WHERE fkc.constraint_object_id = fk.object_id FOR XML PATH('''') )), 2, 8000)) ReferencedColumns
FROM sys.foreign_keys fk
inner join sys.schemas s on fk.schema_id=s.schema_id and s.name=@schema) a
WHERE ParentObject = @TableName
' ;
--PRINT @sql;
INSERT INTO @Definition (FieldValue)
EXEC sys.sp_executesql @sql
, N'@TableName varchar(50),@NewTableName varchar(50),@schema varchar(50)'
, @TableName = @TableName
, @NewTableName = @NewTableName
, @schema = @schema;
SET @sql = N'
use ' + @DBName + N'
SELECT distinct '',CONSTRAINT ['' + replace(c.name,@TableName,@NewTableName) + ''] CHECK '' + definition
FROM sys.check_constraints c join sys.schemas s on c.schema_id=s.schema_id and s.name=@schema
WHERE OBJECT_NAME(parent_object_id) = @TableName
' ;
--PRINT @sql;
INSERT INTO @Definition (FieldValue)
EXEC sys.sp_executesql @sql
, N'@TableName varchar(50),@NewTableName varchar(50),@schema varchar(50)'
, @TableName = @TableName
, @NewTableName = @NewTableName
, @schema = @schema;
SET @sql = N'
use ' + @DBName + N'
SELECT DISTINCT PKObject = cco.object_id
FROM sys.key_constraints cco
JOIN sys.index_columns cc ON cco.parent_object_id = cc.object_id AND cco.unique_index_id = cc.index_id
JOIN sys.indexes i ON cc.object_id = i.object_id AND cc.index_id = i.index_id
join sys.schemas s on cco.schema_id=s.schema_id and s.name=@schema
WHERE OBJECT_NAME(parent_object_id) = @TableName AND i.type = 1 AND is_primary_key = 1
' ;
--PRINT @sql;
INSERT INTO @PKObjectID (ObjectID)
EXEC sys.sp_executesql @sql
, N'@TableName varchar(50),@schema varchar(50)'
, @TableName = @TableName
, @schema = @schema;
SET @sql = N'
use ' + @DBName + N'
SELECT DISTINCT PKObject = cco.object_id
FROM sys.key_constraints cco
JOIN sys.index_columns cc ON cco.parent_object_id = cc.object_id AND cco.unique_index_id = cc.index_id
JOIN sys.indexes i ON cc.object_id = i.object_id AND cc.index_id = i.index_id
join sys.schemas s on cco.schema_id=s.schema_id and s.name=@schema
WHERE OBJECT_NAME(parent_object_id) = @TableName AND i.type = 2 AND is_primary_key = 0 AND is_unique_constraint = 1
' ;
--PRINT @sql;
INSERT INTO @Uniques (ObjectID)
EXEC sys.sp_executesql @sql
, N'@TableName varchar(50),@schema varchar(50)'
, @TableName = @TableName
, @schema = @schema;
SET @ClusteredPK = CASE WHEN @@ROWCOUNT > 0 THEN 1 ELSE 0 END;
DECLARE @t TestTableType;
INSERT @t SELECT * FROM @PKObjectID;
DECLARE @u TestTableType;
INSERT @u SELECT * FROM @Uniques;
SET @sql = N'
use ' + @DBName + N'
SELECT distinct '',CONSTRAINT '' + replace(cco.name,@TableName,@NewTableName) + CASE type WHEN ''PK'' THEN '' PRIMARY KEY '' + CASE WHEN pk.ObjectID IS NULL THEN '' NONCLUSTERED '' ELSE '' CLUSTERED '' END WHEN ''UQ'' THEN '' UNIQUE '' END + CASE WHEN u.ObjectID IS NOT NULL THEN '' NONCLUSTERED '' ELSE '''' END
+ ''(''+REVERSE(SUBSTRING(REVERSE(( SELECT c.name + + CASE WHEN cc.is_descending_key = 1 THEN '' DESC'' ELSE '' ASC'' END + '',''
FROM sys.key_constraints ccok
LEFT JOIN sys.index_columns cc ON ccok.parent_object_id = cc.object_id AND cco.unique_index_id = cc.index_id
LEFT JOIN sys.columns c ON cc.object_id = c.object_id AND cc.column_id = c.column_id
LEFT JOIN sys.indexes i ON cc.object_id = i.object_id AND cc.index_id = i.index_id
WHERE i.object_id = ccok.parent_object_id AND ccok.object_id = cco.object_id
order by key_ordinal FOR XML PATH(''''))), 2, 8000)) + '')''
FROM sys.key_constraints cco
inner join sys.schemas s on cco.schema_id=s.schema_id and s.name=@schema
LEFT JOIN @U u ON cco.object_id = u.objectID
LEFT JOIN @t pk ON cco.object_id = pk.ObjectID
WHERE OBJECT_NAME(cco.parent_object_id) = @TableName
' ;
--PRINT @sql;
INSERT INTO @Definition (FieldValue)
EXEC sys.sp_executesql @sql
, N'@TableName varchar(50),@NewTableName varchar(50),@schema varchar(50),@t TestTableType readonly,@u TestTableType readonly'
, @TableName = @TableName
, @NewTableName = @NewTableName
, @schema = @schema
, @t = @t
, @u = @u;
END;
INSERT INTO @Definition (FieldValue) VALUES (')');
END;
SET @sql = N'
use ' + @DBName
+ N'
select '' on '' + d.name + ''([''+c.name+''])''
from sys.tables t join sys.indexes i on(i.object_id = t.object_id and i.index_id < 2)
join sys.index_columns ic on(ic.partition_ordinal > 0 and ic.index_id = i.index_id and ic.object_id = t.object_id)
join sys.columns c on(c.object_id = ic.object_id and c.column_id = ic.column_id)
join sys.schemas s on t.schema_id=s.schema_id
join sys.data_spaces d on i.data_space_id=d.data_space_id
where t.name=@TableName and s.name=@schema
order by key_ordinal
';
PRINT 'x';
--PRINT @sql;
INSERT INTO @Definition (FieldValue)
EXEC sys.sp_executesql @sql
, N'@TableName varchar(50),@schema varchar(50)'
, @TableName = @TableName
, @schema = @schema;
IF @IncludeClusteredIndex = 1
BEGIN
SET @sql = N'
use ' + @DBName
+ N'
SELECT distinct '' CREATE '' + CASE WHEN i.is_unique = 1 THEN ''UNIQUE '' ELSE '''' end + i.type_desc + '' INDEX ['' + replace(i.name COLLATE SQL_Latin1_General_CP1_CI_AS,@TableName,@NewTableName) + ''] ON '
+ @DBName + N'.' + @NewTableSchema + N'.' + @NewTableName
+ N' (''
+ REVERSE(SUBSTRING(REVERSE(( SELECT name + CASE WHEN sc.is_descending_key = 1 THEN '' DESC'' ELSE '' ASC'' END + '',''
FROM sys.index_columns sc
JOIN sys.columns c ON sc.object_id = c.object_id AND sc.column_id = c.column_id
WHERE t.name=@TableName AND sc.object_id = i.object_id AND sc.index_id = i.index_id
and is_included_column=0
ORDER BY key_ordinal ASC FOR XML PATH('''') )), 2, 8000)) + '')''+
ISNULL( '' include (''+REVERSE(SUBSTRING(REVERSE(( SELECT name + '',''
FROM sys.index_columns sc
JOIN sys.columns c ON sc.object_id = c.object_id AND sc.column_id = c.column_id
WHERE t.name=@TableName AND sc.object_id = i.object_id AND sc.index_id = i.index_id
and is_included_column=1
ORDER BY key_ordinal ASC FOR XML PATH('''') )), 2, 8000))+'')'' ,'''')+''''
FROM sys.indexes i join sys.tables t on i.object_id=t.object_id
join sys.schemas s on t.schema_id=s.schema_id
AND CASE WHEN @ClusteredPK = 1 AND is_primary_key = 1 AND i.type = 1 THEN 0 ELSE 1 END = 1 AND is_unique_constraint = 0 AND is_primary_key = 0
where t.name=@TableName and s.name=@schema and i.type_desc = ''CLUSTERED''
' ;
--PRINT @sql;
INSERT INTO @Definition (FieldValue)
EXEC sys.sp_executesql @sql
, N'@TableName varchar(50),@NewTableName varchar(50),@schema varchar(50), @ClusteredPK bit'
, @TableName = @TableName
, @NewTableName = @NewTableName
, @schema = @schema
, @ClusteredPK = @ClusteredPK;
END;
IF @IncludeIndexes = 1
BEGIN
SET @sql = N'
use ' + @DBName
+ N'
SELECT distinct '' CREATE '' + CASE WHEN i.is_unique = 1 THEN ''UNIQUE '' ELSE '''' end + i.type_desc + '' INDEX ['' + replace(i.name COLLATE SQL_Latin1_General_CP1_CI_AS,@TableName,@NewTableName) + ''] ON '
+ @DBName + N'.' + @NewTableSchema + N'.' + @NewTableName
+ N' (''
+ REVERSE(SUBSTRING(REVERSE(( SELECT name + CASE WHEN sc.is_descending_key = 1 THEN '' DESC'' ELSE '' ASC'' END + '',''
FROM sys.index_columns sc
JOIN sys.columns c ON sc.object_id = c.object_id AND sc.column_id = c.column_id
WHERE t.name=@TableName AND sc.object_id = i.object_id AND sc.index_id = i.index_id
and is_included_column=0
ORDER BY key_ordinal ASC FOR XML PATH('''') )), 2, 8000)) + '')''+
ISNULL( '' include (''+REVERSE(SUBSTRING(REVERSE(( SELECT name + '',''
FROM sys.index_columns sc
JOIN sys.columns c ON sc.object_id = c.object_id AND sc.column_id = c.column_id
WHERE t.name=@TableName AND sc.object_id = i.object_id AND sc.index_id = i.index_id
and is_included_column=1
ORDER BY key_ordinal ASC FOR XML PATH('''') )), 2, 8000))+'')'' ,'''')+''''
FROM sys.indexes i join sys.tables t on i.object_id=t.object_id
join sys.schemas s on t.schema_id=s.schema_id
AND CASE WHEN @ClusteredPK = 1 AND is_primary_key = 1 AND i.type = 1 THEN 0 ELSE 1 END = 1 AND is_unique_constraint = 0 AND is_primary_key = 0
where t.name=@TableName and s.name=@schema and i.type_desc <> ''CLUSTERED''
' ;
PRINT @sql;
INSERT INTO @Definition (FieldValue)
EXEC sys.sp_executesql @sql
, N'@TableName varchar(50),@NewTableName varchar(50),@schema varchar(50), @ClusteredPK bit'
, @TableName = @TableName
, @NewTableName = @NewTableName
, @schema = @schema
, @ClusteredPK = @ClusteredPK;
END;
--SELECT * FROM @Definition;
INSERT INTO @MainDefinition (FieldValue)
SELECT FieldValue FROM @Definition ORDER BY DefinitionID ASC;
--SELECT * FROM @MainDefinition;
----------------------------------
DECLARE @q Varchar(MAX);
SET @q = (SELECT Replace((SELECT FieldValue FROM @MainDefinition FOR XML PATH('')), '</FieldValue>', ''));
SET @script = (SELECT Replace(@q, '<FieldValue>', ''));
END TRY
-- ##############################################################################################################################################################################
BEGIN CATCH
BEGIN
-- INIZIO Procedura in errore =========================================================================================================================================================
PRINT '***********************************************************************************************************************************************************';
PRINT 'ErrorNumber : ' + Cast(Error_Number() AS NVarchar(MAX));
PRINT 'ErrorSeverity : ' + Cast(Error_Severity() AS NVarchar(MAX));
PRINT 'ErrorState : ' + Cast(Error_State() AS NVarchar(MAX));
PRINT 'ErrorLine : ' + Cast(Error_Line() AS NVarchar(MAX));
PRINT 'ErrorMessage : ' + Cast(Error_Message() AS NVarchar(MAX));
PRINT '***********************************************************************************************************************************************************';
-- FINE Procedura in errore =========================================================================================================================================================
END;
SET @script = '';
RETURN -1;
END CATCH;
-- ############################################################################################################################################################################## Bu betiği, bir tablo yapısını yabancı anahtarlarla ancak indeksler olmadan kopyalamak için kullanabilirsiniz. Bu komut dosyası, kullanıcı tanımlı türleri ve hesaplanan sütunları incelikle ele alır.
--\
---) Author: Hans Michiels
---) Script to copy a sql server table structure with foreign keys but without indexes.
---) This script handles user defined types and computed columns gracefully.
--/
/*
(c) Copyright 2016 - hansmichiels.com
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
--\
---) VARIABLES DECLARATIONS
--/
DECLARE @CrLf NVARCHAR(2)
DECLARE @Indent NVARCHAR(2)
DECLARE @nsql NVARCHAR(MAX)
DECLARE @SimulationMode CHAR(1)
DECLARE @SourceSchemaAndTable NVARCHAR(260)
DECLARE @TargetSchemaAndTable NVARCHAR(260)
DECLARE @FkNameSuffix NVARCHAR(128)
DECLARE @TableOptions NVARCHAR(500)
--\
---) CONFIGURATION: set the source and target schema/tablename here, and some other settings.
--/
SELECT
@SimulationMode = 'Y' -- Use Y if you only want the SQL statement in the output window without it being executed.
, @SourceSchemaAndTable = '[Production].[Product]'
, @TargetSchemaAndTable = '[stg].[Product]'
, @TableOptions = ' WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY]'
, @FkNameSuffix = '_' + REPLACE(CAST(NEWID() AS VARCHAR(40)), '-', '') -- A Guid is added to the foreign key name to make it unique.
, @CrLf = CHAR(13) + CHAR(10)
, @Indent = SPACE(2)
-- For 'min' script use this (in case sql is near 4000 characters):
-- , @CrLf = ' '
-- , @Indent = ''
--\
---) BUILD SQL FOR CLONING TABLE
--/
SELECT @nsql
= ISNULL(@nsql, '')
+ CASE col_sequence WHEN 1 THEN
@CrLf + 'IF OBJECT_ID(N''' + @TargetSchemaAndTable + ''', ''U'') IS NOT NULL DROP TABLE ' + @TargetSchemaAndTable + ';'
+ @CrLf + 'CREATE TABLE ' + @TargetSchemaAndTable + @CrLf + @Indent + '( ' ELSE @CrLf + @Indent + ', ' END
+ [definition]
FROM (
SELECT ROW_NUMBER() OVER (PARTITION BY tb.object_id ORDER BY tb.object_id, col.column_id) AS col_sequence
, QUOTENAME(col.name) + ' '
+ COALESCE(
'AS ' + cmp.definition + CASE ISNULL(cmp.is_persisted, 0) WHEN 1 THEN ' PERSISTED ' ELSE '' END,
CASE
WHEN col.system_type_id != col.user_type_id THEN QUOTENAME(usr_tp.schema_name) + '.' + QUOTENAME(usr_tp.name)
ELSE
QUOTENAME(sys_tp.name) +
CASE
WHEN sys_tp.name IN ('char', 'varchar', 'binary', 'varbinary') THEN '(' + CONVERT(VARCHAR, CASE col.max_length WHEN -1 THEN 'max' ELSE CAST(col.max_length AS varchar(10)) END) + ')'
WHEN sys_tp.name IN ('nchar', 'nvarchar') THEN '(' + CONVERT(VARCHAR, CASE col.max_length WHEN -1 THEN 'max' ELSE CAST(col.max_length/2 AS varchar(10)) END) + ')'
WHEN sys_tp.name IN ('decimal', 'numeric') THEN '(' + CAST(col.precision AS VARCHAR) + ',' + CAST(col.scale AS VARCHAR) + ')'
WHEN sys_tp.name IN ('datetime2') THEN '(' + CAST(col.scale AS VARCHAR) + ')'
ELSE ''
END
END
)
+ CASE col.is_nullable
WHEN 0 THEN ' NOT'
ELSE ''
END + ' NULL' AS [definition]
FROM sys.tables tb
JOIN sys.schemas sch
ON sch.schema_id = tb.schema_id
JOIN sys.columns col
ON col.object_id = tb.object_id
JOIN sys.types sys_tp
ON col.system_type_id = sys_tp.system_type_id
AND col.system_type_id = sys_tp.user_type_id
LEFT JOIN
(
SELECT tp.*, sch.name AS [schema_name]
FROM sys.types tp
JOIN sys.schemas sch
ON tp.schema_id = sch.schema_id
) usr_tp
ON col.system_type_id = usr_tp.system_type_id
AND col.user_type_id = usr_tp.user_type_id
LEFT JOIN sys.computed_columns cmp
ON cmp.object_id = tb.object_id
AND cmp.column_id = col.column_id
WHERE tb.object_id = OBJECT_ID(@SourceSchemaAndTable, 'U')
) subqry
;
SELECT @nsql
= ISNULL(@nsql, '')
+ CASE col_sequence
WHEN 1 THEN @CrLf + ', PRIMARY KEY ' + CASE is_clustered_index WHEN 1 THEN 'CLUSTERED' ELSE 'NONCLUSTERED' END
+ @CrLf + @Indent + '( '
ELSE @CrLf + @Indent + ', '
END
+ QUOTENAME(pk_cols.column_name)
+ CASE is_descending_key
WHEN 1 THEN ' DESC'
ELSE ' ASC'
END
FROM (
SELECT TOP 2147483647 sch.name as schema_name, tb.name as table_name, col.name as column_name
, ROW_NUMBER() OVER (PARTITION BY tb.object_id ORDER BY tb.object_id, col.column_id) AS col_sequence
, ic.is_descending_key
, CASE WHEN idx.index_id = 1 THEN 1 ELSE 0 END AS [is_clustered_index]
FROM sys.tables tb
JOIN sys.schemas sch
ON sch.schema_id = tb.schema_id
JOIN sys.indexes idx
ON idx.is_primary_key = 1
AND idx.object_id = tb.object_id
JOIN sys.index_columns ic
ON is_included_column = 0
AND ic.object_id = tb.object_id
AND ic.index_id = idx.index_id
JOIN sys.columns col
ON col.column_id = ic.column_id
AND col.object_id = tb.object_id
WHERE tb.object_id = OBJECT_ID(@SourceSchemaAndTable, 'U')
ORDER BY col.column_id
) pk_cols
SELECT @nsql = @nsql + @CrLf + @indent + ') ' + @TableOptions
IF @SimulationMode = 'Y'
BEGIN
PRINT '-- Simulation mode: script is not executed.'
END
PRINT @nsql;
IF @SimulationMode != 'Y'
BEGIN
EXEC(@nsql);
END
--\
---) Copy foreign key constraints
---) A guid is added to the foreign key name to make it unique within the database.
--/
SET @nsql = N'';
SELECT @nsql += N'
ALTER TABLE '
+ @TargetSchemaAndTable
+ ' ADD CONSTRAINT [' + LEFT(fk.name + @FkNameSuffix, 128) + '] '
+ ' FOREIGN KEY (' + STUFF((SELECT ',' + QUOTENAME(col.name)
-- get all the columns in the constraint table
FROM sys.columns AS col
JOIN sys.foreign_key_columns AS fkc
ON fkc.parent_column_id = col.column_id
AND fkc.parent_object_id = col.[object_id]
WHERE fkc.constraint_object_id = fk.[object_id]
ORDER BY fkc.constraint_column_id
FOR XML PATH(N''), TYPE).value(N'.[1]', N'nvarchar(max)'), 1, 1, N'')
+ ') REFERENCES ' + QUOTENAME(rs.name) + '.' + QUOTENAME(rtb.name)
+ '('
+ STUFF((SELECT ',' + QUOTENAME(col.name)
-- get all the referenced columns
FROM sys.columns AS col
JOIN sys.foreign_key_columns AS fkc
ON fkc.referenced_column_id = col.column_id
AND fkc.referenced_object_id = col.[object_id]
WHERE fkc.constraint_object_id = fk.object_id
ORDER BY fkc.constraint_column_id
FOR XML PATH(N''), TYPE).value(N'.[1]', N'nvarchar(max)'), 1, 1, N'') + ');'
FROM sys.foreign_keys AS fk
JOIN sys.tables AS rtb -- referenced table
ON fk.referenced_object_id = rtb.[object_id]
JOIN sys.schemas AS rs
ON rtb.[schema_id] = rs.[schema_id]
JOIN sys.tables AS ctb -- constraint table
ON fk.parent_object_id = ctb.[object_id]
WHERE rtb.is_ms_shipped = 0 AND ctb.is_ms_shipped = 0
AND ctb.object_id = OBJECT_ID(@SourceSchemaAndTable, 'U');
IF @SimulationMode = 'Y'
BEGIN
PRINT '-- Simulation mode: script is not executed.'
END
PRINT @nsql;
IF @SimulationMode != 'Y'
BEGIN
EXEC(@nsql);
ENDEğer ilgileniyorsanız, blogumda da bulabilirsiniz: http://www.hansmichiels.com/2016/02/18/how-to-copy-a-database-table-structure-t-sql-scripting-series -s01e01 /