Yabancı anahtarlar ve referans aldıkları tablolar listesi

Bana bir tablo ve tablolar ve başvurulan sütunlar için yabancı anahtarların bir listesini döndürecek bir sorgu bulmaya çalışıyorum. Orada yarı yoldayım

SELECT a.table_name, 
       a.column_name, 
       a.constraint_name, 
       c.owner
FROM ALL_CONS_COLUMNS A, ALL_CONSTRAINTS C  
where A.CONSTRAINT_NAME = C.CONSTRAINT_NAME 
  and a.table_name=:TableName 
  and C.CONSTRAINT_TYPE = 'R'

Ama yine de hangi tablo ve birincil anahtar bu anahtar tarafından başvuruluyor bilmek gerekir. Bunu nasıl elde edebilirim?

Başvurulan birincil anahtar sütunlarda r_ownerve r_constraint_nametablonun içinde açıklanmıştır ALL_CONSTRAINTS. Bu size istediğiniz bilgileri verecektir:

SELECT a.table_name, a.column_name, a.constraint_name, c.owner, 
       -- referenced pk
       c.r_owner, c_pk.table_name r_table_name, c_pk.constraint_name r_pk
  FROM all_cons_columns a
  JOIN all_constraints c ON a.owner = c.owner
                        AND a.constraint_name = c.constraint_name
  JOIN all_constraints c_pk ON c.r_owner = c_pk.owner
                           AND c.r_constraint_name = c_pk.constraint_name
 WHERE c.constraint_type = 'R'
   AND a.table_name = :TableName

Bunu dene:

select * from all_constraints where r_constraint_name in (select constraint_name 
from all_constraints where table_name='YOUR_TABLE_NAME');

İşte son derece kullanışlı olan çok amaçlı bir komut dosyası.

Doğrudan yürütebilmeniz için kaydedin (@ fkeys.sql). Sahip'e ve Üst veya Alt tabloya göre arama yapmanıza ve yabancı anahtar ilişkileri göstermenize olanak tanır. Geçerli komut dosyası C: \ SQLRPTS'ye açıkça biriktirir, bu nedenle bu satırı değiştirmek istediğiniz bir klasörde kullanmanız gerekir.

REM ########################################################################
REM ##
REM ##   fkeys.sql
REM ##
REM ##   Displays the foreign key relationships
REM ##
REM #######################################################################

CLEAR BREAK
CLEAR COL
SET LINES 200
SET PAGES 54
SET NEWPAGE 0
SET WRAP OFF
SET VERIFY OFF
SET FEEDBACK OFF

break on table_name skip 2 on constraint_name on r_table_name skip 1

column CHILDCOL format a60 head 'CHILD COLUMN'
column PARENTCOL format a60 head 'PARENT COLUMN'
column constraint_name format a30 head 'FK CONSTRAINT NAME'
column delete_rule format a15
column bt noprint
column bo noprint

TTITLE LEFT _DATE CENTER 'FOREIGN KEY RELATIONSHIPS ON &new_prompt' RIGHT 'PAGE:'FORMAT 999 SQL.PNO SKIP 2

SPOOL C:\SQLRPTS\FKeys_&new_prompt
ACCEPT OWNER_NAME PROMPT 'Enter Table Owner (or blank for all): '
ACCEPT PARENT_TABLE_NAME PROMPT 'Enter Parent Table or leave blank for all: '
ACCEPT CHILD_TABLE_NAME PROMPT 'Enter Child Table or leave blank for all: '

  select b.owner || '.' || b.table_name || '.' || b.column_name CHILDCOL,
         b.position,
         c.owner || '.' || c.table_name || '.' || c.column_name PARENTCOL,
         a.constraint_name,
         a.delete_rule,
         b.table_name bt,
         b.owner bo
    from all_cons_columns b,
         all_cons_columns c,
         all_constraints a
   where b.constraint_name = a.constraint_name
     and a.owner           = b.owner
     and b.position        = c.position
     and c.constraint_name = a.r_constraint_name
     and c.owner           = a.r_owner
     and a.constraint_type = 'R'
     and c.owner      like case when upper('&OWNER_NAME') is null then '%'
                                else upper('&OWNER_NAME') end
     and c.table_name like case when upper('&PARENT_TABLE_NAME') is null then '%'
                                else upper('&PARENT_TABLE_NAME') end
     and b.table_name like case when upper('&CHILD_TABLE_NAME') is null then '%'
                                else upper('&CHILD_TABLE_NAME') end
order by 7,6,4,2
/
SPOOL OFF
TTITLE OFF
SET FEEDBACK ON
SET VERIFY ON
CLEAR BREAK
CLEAR COL
SET PAGES 24
SET LINES 100
SET NEWPAGE 1
UNDEF OWNER

Bu, belirli bir tablo ve sütun için yabancı anahtarlar hiyerarşisini seyahat eder ve alt ve torun ile tüm alt tablolardan sütunları döndürür. User_constraints öğesine r_table_name ve r_column_name eklemek için alt sorgular kullanır ve ardından satırları bağlamak için bunları kullanır.

select distinct table_name, constraint_name, column_name, r_table_name, position, constraint_type 
from (
    SELECT uc.table_name, 
    uc.constraint_name, 
    cols.column_name, 
    (select table_name from user_constraints where constraint_name = uc.r_constraint_name) 
        r_table_name,
    (select column_name from user_cons_columns where constraint_name = uc.r_constraint_name and position = cols.position) 
        r_column_name,
    cols.position,
    uc.constraint_type
    FROM user_constraints uc
    inner join user_cons_columns cols on uc.constraint_name = cols.constraint_name 
    where constraint_type != 'C'
) 
start with table_name = 'MY_TABLE_NAME' and column_name = 'MY_COLUMN_NAME'  
connect by nocycle 
prior table_name = r_table_name 
and prior column_name = r_column_name;

İşte başka bir çözüm. Sys varsayılan görünümlerini kullanmak çok yavaş (benim durumumda yaklaşık 10s). Bu bundan daha hızlıdır (yaklaşık 0,5 sn).

SELECT
    CONST.NAME AS CONSTRAINT_NAME,
    RCONST.NAME AS REF_CONSTRAINT_NAME,

    OBJ.NAME AS TABLE_NAME,
    COALESCE(ACOL.NAME, COL.NAME) AS COLUMN_NAME,
    CCOL.POS# AS POSITION,

    ROBJ.NAME AS REF_TABLE_NAME,
    COALESCE(RACOL.NAME, RCOL.NAME) AS REF_COLUMN_NAME,
    RCCOL.POS# AS REF_POSITION
FROM SYS.CON$ CONST
INNER JOIN SYS.CDEF$ CDEF ON CDEF.CON# = CONST.CON#
INNER JOIN SYS.CCOL$ CCOL ON CCOL.CON# = CONST.CON#
INNER JOIN SYS.COL$ COL  ON (CCOL.OBJ# = COL.OBJ#) AND (CCOL.INTCOL# = COL.INTCOL#)
INNER JOIN SYS.OBJ$ OBJ ON CCOL.OBJ# = OBJ.OBJ#
LEFT JOIN SYS.ATTRCOL$ ACOL ON (CCOL.OBJ# = ACOL.OBJ#) AND (CCOL.INTCOL# = ACOL.INTCOL#)

INNER JOIN SYS.CON$ RCONST ON RCONST.CON# = CDEF.RCON#
INNER JOIN SYS.CCOL$ RCCOL ON RCCOL.CON# = RCONST.CON#
INNER JOIN SYS.COL$ RCOL  ON (RCCOL.OBJ# = RCOL.OBJ#) AND (RCCOL.INTCOL# = RCOL.INTCOL#)
INNER JOIN SYS.OBJ$ ROBJ ON RCCOL.OBJ# = ROBJ.OBJ#
LEFT JOIN SYS.ATTRCOL$ RACOL  ON (RCCOL.OBJ# = RACOL.OBJ#) AND (RCCOL.INTCOL# = RACOL.INTCOL#)

WHERE CONST.OWNER# = userenv('SCHEMAID')
  AND RCONST.OWNER# = userenv('SCHEMAID')
  AND CDEF.TYPE# = 4  /* 'R' Referential/Foreign Key */;

Kullanıcının tüm yabancı anahtarlarına ihtiyacınız varsa, aşağıdaki komut dosyasını kullanın

SELECT a.constraint_name, a.table_name, a.column_name,  c.owner, 
       c_pk.table_name r_table_name,  b.column_name r_column_name
  FROM user_cons_columns a
  JOIN user_constraints c ON a.owner = c.owner
       AND a.constraint_name = c.constraint_name
  JOIN user_constraints c_pk ON c.r_owner = c_pk.owner
       AND c.r_constraint_name = c_pk.constraint_name
  JOIN user_cons_columns b ON C_PK.owner = b.owner
       AND  C_PK.CONSTRAINT_NAME = b.constraint_name AND b.POSITION = a.POSITION     
 WHERE c.constraint_type = 'R'

Vincent Malgrat koduna göre

Cevap vermenin biraz geç olduğunu biliyorum ama yine de cevap vereyim, yukarıdaki cevaplardan bazıları oldukça karmaşık ve dolayısıyla burada çok daha basit bir cevap var.

SELECT a.table_name child_table, a.column_name child_column, a.constraint_name, 
      b.table_name parent_table, b.column_name parent_column
  FROM all_cons_columns a
  JOIN all_constraints c ON a.owner = c.owner AND a.constraint_name = c.constraint_name
 join all_cons_columns b on c.owner = b.owner and c.r_constraint_name = b.constraint_name
 WHERE c.constraint_type = 'R'
   AND a.table_name = 'your table name'

Birinin UAT ortam tablosundan Live'a FK kısıtlamaları oluşturmak istemesi durumunda dinamik sorgunun altına ateşleyin .....

    SELECT 'ALTER TABLE '||OBJ.NAME||' ADD CONSTRAINT '||CONST.NAME||'     FOREIGN KEY ('||COALESCE(ACOL.NAME, COL.NAME)||') REFERENCES '
||ROBJ.NAME ||' ('||COALESCE(RACOL.NAME, RCOL.NAME) ||');'
FROM SYS.CON$ CONST
INNER JOIN SYS.CDEF$ CDEF ON CDEF.CON# = CONST.CON#
INNER JOIN SYS.CCOL$ CCOL ON CCOL.CON# = CONST.CON#
INNER JOIN SYS.COL$ COL  ON (CCOL.OBJ# = COL.OBJ#) AND (CCOL.INTCOL# =     COL.INTCOL#)
INNER JOIN SYS.OBJ$ OBJ ON CCOL.OBJ# = OBJ.OBJ#
LEFT JOIN SYS.ATTRCOL$ ACOL ON (CCOL.OBJ# = ACOL.OBJ#) AND (CCOL.INTCOL# =     ACOL.INTCOL#)

INNER JOIN SYS.CON$ RCONST ON RCONST.CON# = CDEF.RCON#
INNER JOIN SYS.CCOL$ RCCOL ON RCCOL.CON# = RCONST.CON#
INNER JOIN SYS.COL$ RCOL  ON (RCCOL.OBJ# = RCOL.OBJ#) AND (RCCOL.INTCOL# =     RCOL.INTCOL#)
INNER JOIN SYS.OBJ$ ROBJ ON RCCOL.OBJ# = ROBJ.OBJ#
LEFT JOIN SYS.ATTRCOL$ RACOL  ON (RCCOL.OBJ# = RACOL.OBJ#) AND     (RCCOL.INTCOL# = RACOL.INTCOL#)

WHERE CONST.OWNER# = userenv('SCHEMAID')
AND RCONST.OWNER# = userenv('SCHEMAID')
AND CDEF.TYPE# = 4 
AND OBJ.NAME = <table_name>;

Benim versiyonum, benim düşünceme göre, daha okunabilir:

SELECT   PARENT.TABLE_NAME  "PARENT TABLE_NAME"
,        PARENT.CONSTRAINT_NAME  "PARENT PK CONSTRAINT"
,       '->' " "
,        CHILD.TABLE_NAME  "CHILD TABLE_NAME"
,        CHILD.COLUMN_NAME  "CHILD COLUMN_NAME"
,        CHILD.CONSTRAINT_NAME  "CHILD CONSTRAINT_NAME"
FROM     ALL_CONS_COLUMNS   CHILD
,        ALL_CONSTRAINTS   CT
,        ALL_CONSTRAINTS   PARENT
WHERE    CHILD.OWNER  =  CT.OWNER
AND      CT.CONSTRAINT_TYPE  = 'R'
AND      CHILD.CONSTRAINT_NAME  =  CT.CONSTRAINT_NAME 
AND      CT.R_OWNER  =  PARENT.OWNER
AND      CT.R_CONSTRAINT_NAME  =  PARENT.CONSTRAINT_NAME 
AND      CHILD.TABLE_NAME  = ::table -- table name variable
AND      CT.OWNER  = ::owner; -- schema variable, could not be needed

Biraz geç kaldı, ama umarım cevabım Kompozit yabancı anahtarları seçmesi gereken biri için yararlı oldu.

SELECT
    "C"."CONSTRAINT_NAME",
    "C"."OWNER" AS "SCHEMA_NAME",
    "C"."TABLE_NAME",
    "COL"."COLUMN_NAME",
    "REF_COL"."OWNER" AS "REF_SCHEMA_NAME",
    "REF_COL"."TABLE_NAME" AS "REF_TABLE_NAME",
    "REF_COL"."COLUMN_NAME" AS "REF_COLUMN_NAME"
FROM
    "USER_CONSTRAINTS" "C"
INNER JOIN "USER_CONS_COLUMNS" "COL" ON "COL"."OWNER" = "C"."OWNER"
 AND "COL"."CONSTRAINT_NAME" = "C"."CONSTRAINT_NAME"
INNER JOIN "USER_CONS_COLUMNS" "REF_COL" ON "REF_COL"."OWNER" = "C"."R_OWNER"
 AND "REF_COL"."CONSTRAINT_NAME" = "C"."R_CONSTRAINT_NAME"
 AND "REF_COL"."POSITION" = "COL"."POSITION"
WHERE "C"."TABLE_NAME" = 'TableName' AND "C"."CONSTRAINT_TYPE" = 'R'

Kodun altında kullandım ve amacım-

SELECT fk.owner, fk.table_name, col.column_name
FROM dba_constraints pk, dba_constraints fk, dba_cons_columns col
WHERE pk.constraint_name = fk.r_constraint_name
AND fk.constraint_name = col.constraint_name
AND pk.owner = col.owner
AND pk.owner = fk.owner
AND fk.constraint_type = 'R'   
AND pk.owner = sys_context('USERENV', 'CURRENT_SCHEMA') 
AND pk.table_name = :my_table
AND pk.constraint_type = 'P';

select d.table_name,

       d.constraint_name "Primary Constraint Name",

       b.constraint_name "Referenced Constraint Name"

from user_constraints d,

     (select c.constraint_name,

             c.r_constraint_name,

             c.table_name

      from user_constraints c 

      where table_name='EMPLOYEES' --your table name instead of EMPLOYEES

      and constraint_type='R') b

where d.constraint_name=b.r_constraint_name

SELECT a.table_name, a.column_name, a.constraint_name, c.owner, 
       -- referenced pk
       c.r_owner, c_pk.table_name r_table_name, c_pk.constraint_name r_pk
  FROM all_cons_columns a
  JOIN all_constraints c ON a.owner = c.owner
                        AND a.constraint_name = c.constraint_name
  JOIN all_constraints c_pk ON c.r_owner = c_pk.owner
                           AND c.r_constraint_name = c_pk.constraint_name
 WHERE c.constraint_type = 'R'
   AND a.table_name :=TABLE_NAME
   AND c.owner :=OWNER_NAME;

WITH reference_view AS
     (SELECT a.owner, a.table_name, a.constraint_name, a.constraint_type,
             a.r_owner, a.r_constraint_name, b.column_name
        FROM dba_constraints a, dba_cons_columns b
       WHERE  a.owner LIKE UPPER ('SYS') AND
          a.owner = b.owner
         AND a.constraint_name = b.constraint_name
         AND constraint_type = 'R'),
     constraint_view AS
     (SELECT a.owner a_owner, a.table_name, a.column_name, b.owner b_owner,
             b.constraint_name
        FROM dba_cons_columns a, dba_constraints b
       WHERE a.owner = b.owner
         AND a.constraint_name = b.constraint_name
         AND b.constraint_type = 'P'
         AND a.owner LIKE UPPER ('SYS')
         )
SELECT  
       rv.table_name FK_Table , rv.column_name FK_Column ,
       CV.table_name PK_Table , rv.column_name PK_Column , rv.r_constraint_name Constraint_Name 
  FROM reference_view rv, constraint_view CV
 WHERE rv.r_constraint_name = CV.constraint_name AND rv.r_owner = CV.b_owner;

UserTable Yükle için (Yabancı anahtarların ve başvuru yaptıkları tabloların listesi)

WITH

reference_view AS
     (SELECT a.owner, a.table_name, a.constraint_name, a.constraint_type,
             a.r_owner, a.r_constraint_name, b.column_name
        FROM dba_constraints a, dba_cons_columns b
       WHERE 
          a.owner = b.owner
         AND a.constraint_name = b.constraint_name
         AND constraint_type = 'R'),
constraint_view AS
     (SELECT a.owner a_owner, a.table_name, a.column_name, b.owner b_owner,
             b.constraint_name
        FROM dba_cons_columns a, dba_constraints b
       WHERE a.owner = b.owner
         AND a.constraint_name = b.constraint_name
         AND b.constraint_type = 'P'

         ) ,
usertableviewlist AS 
(
      select  TABLE_NAME  from user_tables  
) 
SELECT  
       rv.table_name FK_Table , rv.column_name FK_Column ,
       CV.table_name PK_Table , rv.column_name PK_Column , rv.r_constraint_name Constraint_Name 
  FROM reference_view rv, constraint_view CV , usertableviewlist UTable
 WHERE rv.r_constraint_name = CV.constraint_name AND rv.r_owner = CV.b_owner And UTable.TABLE_NAME = rv.table_name;