Bir Anacron İşini manuel olarak çalıştırma


11

Sistemimin minimum kurulumunu yaptım. Bu sistemi PLEX medya sunucusu olarak kullanmak istiyorum. LXDE'yi hafif bir GUI olduğu için yapılandırdım. Sistemimi rsnapshot kullanarak otomatik yedekleme alacak şekilde yapılandırıyorum. Başarıyla benim rsnapshot.conf dosya yapılandırdı ve terminal rsnapshot haftalık komut çalıştırarak istenen sonuçları alıyorum.

İşte benim rsnapshot.conf dosya:

#################################################
# rsnapshot.conf - rsnapshot configuration file #
#################################################
#                                               #
# PLEASE BE AWARE OF THE FOLLOWING RULE:        #
#                                               #
# This file requires tabs between elements      #
#                                               #
#################################################

#######################
# CONFIG FILE VERSION #
#######################

config_version  1.2

###########################
# SNAPSHOT ROOT DIRECTORY #
###########################

# All snapshots will be stored under this root directory.
#
snapshot_root   /media/siddharth/Backup/Backup

# If no_create_root is enabled, rsnapshot will not automatically create the
# snapshot_root directory. This is particularly useful if you are backing
# up to removable media, such as a FireWire or USB drive.
#
# no_create_root    1

#################################
# EXTERNAL PROGRAM DEPENDENCIES #
#################################

# LINUX USERS:   Be sure to uncomment "cmd_cp". This gives you extra features.
# EVERYONE ELSE: Leave "cmd_cp" commented out for compatibility.
#
# See the README file or the man page for more details.
#
cmd_cp  /bin/cp

# uncomment this to use the rm program instead of the built-in perl routine.
#
cmd_rm  /bin/rm

# rsync must be enabled for anything to work. This is the only command that
# must be enabled.
#
cmd_rsync   /usr/bin/rsync

# Uncomment this to enable remote ssh backups over rsync.
#
#cmd_ssh    /usr/bin/ssh

# Comment this out to disable syslog support.
#
cmd_logger  /usr/bin/logger

# Uncomment this to specify the path to "du" for disk usage checks.
# If you have an older version of "du", you may also want to check the
# "du_args" parameter below.
#
cmd_du  /usr/bin/du

# Uncomment this to specify the path to rsnapshot-diff.
#
cmd_rsnapshot_diff  /usr/bin/rsnapshot-diff

# Specify the path to a script (and any optional arguments) to run right
# before rsnapshot syncs files
#
#cmd_preexec    /path/to/preexec/script

# Specify the path to a script (and any optional arguments) to run right
# after rsnapshot syncs files
#
#cmd_postexec   /path/to/postexec/script

# Paths to lvcreate, lvremove, mount and umount commands, for use with
# Linux LVMs.
#
#linux_lvm_cmd_lvcreate /sbin/lvcreate
#linux_lvm_cmd_lvremove /sbin/lvremove
#linux_lvm_cmd_mount    /bin/mount
#linux_lvm_cmd_umount   /bin/umount

#########################################
#     BACKUP LEVELS / INTERVALS         #
# Must be unique and in ascending order #
# e.g. alpha, beta, gamma, etc.         #
#########################################
retain  weekly  1           #
#retain alpha   6
#retain beta    7
#retain gamma   4
#retain delta   3

############################################
#              GLOBAL OPTIONS              #
# All are optional, with sensible defaults #
############################################

# Verbose level, 1 through 5.
# 1     Quiet           Print fatal errors only
# 2     Default         Print errors and warnings only
# 3     Verbose         Show equivalent shconfig_version    1.2ell commands being executed
# 4     Extra Verbose   Show extra verbose information
# 5     Debug mode      Everything
#
verbose 2

# Same as "verbose" above, but controls the amount of data sent to the
# logfile, if one is being used. The default is 3.
#
loglevel    3

# If you enable this, data will be written to the file you specify. The
# amount of data written is controlled by the "loglevel" parameter.
#
logfile /media/siddharth/Backup/Backup/Logs/Snapshot.log

# If enabled, rsnapshot will write a lockfile to prevent two instances
# from running simultaneously (and messing up the snapshot_root).
# If you enable this, make sure the lockfile directory is not world
# writable. Otherwise anyone can prevent the program from running.
#
lockfile    /var/run/rsnapshot.pid

# By default, rsnapshot check lockfile, check if PID is running
# and if not, consider lockfile as stale, then start
# Enabling this stop rsnapshot if PID in lockfile is not running
#
#stop_on_stale_lockfile     0

# Default rsync args. All rsync commands have at least these options set.
#
#rsync_short_args   -a
#rsync_long_args    --delete        -relative   --numeric-ids   --delete-excluded

# ssh has no args passed by default, but you can specify some here.
#
#ssh_args   -p 22

# Default arguments for the "du" program (for disk space reporting).
# The GNU version of "du" is preferred. See the man page for more details.
# If your version of "du" doesn't support the -h flag, try -k flag instead.
#
#du_args    -csh

# If this is enabled, rsync won't span filesystem partitions within a
# backup point. This essentially passes the -x option to rsync.
# The default is 0 (off).
#
#one_fs     0

# The include and exclude parameters, if enabled, simply get passed directly
# to rsync. If you have multiple include/exclude    # /etc/anacrontab: configuration file for anacron

# See anacron(8) and anacrontab(5) for details.

SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
HOME=/root
LOGNAME=root

# These replace cron's entries
1   5   cron.daily  run-parts --report /etc/cron.daily
7   10  cron.weekly run-parts --report /etc/cron.weekly
@monthly    15  cron.monthly    run-parts --report /etc/cron.monthly
7   5   backup.weekly   rsnapshot weekly >> /media/siddharth/Backup/Backup/Logs/Anacron/log patterns, put each one on a
# separate line. Please look up the --include and --exclude options in the
# rsync man page for more details on how to specify file name patterns. 
# 
#include    ???
#exclude    ???
#exclude    ???

# The include_file and exclude_file parameters, if enabled, simply get
# passed directly to rsync. Please look up the --include-from and
# --exclude-from options in the rsync man page for more details.
#
# include_file  ???
# exclude_file  ???

# If your version of rsync supports --link-dest, consider enabling this.
# This is the best way to support special files (FIFOs, etc) cross-platform.
# The default is 0 (off).
#
link_dest   1

# When sync_first is enabled, it changes the default behaviour of rsnapshot.
# Normally, when rsnapshot is called with its lowest interval
# (i.e.: "rsnapshot alpha"), it will sync files AND rotate the lowest
# intervals. With sync_first enabled, "rsnapshot sync" handles the file sync,
# and all interval calls simply rotate files. See the man page for more
# details. The default is 0 (off).
#
# sync_first    1

# If enabled, rsnapshot will move the oldest directory for each interval
# to [interval_name].delete, then it will remove the lockfile and delete
# that directory just before it exits. The default is 0 (off).
#
#use_lazy_deletes   0

# Number of rsync re-tries. If you experience any network problems or
# network card issues that tend to cause ssh to fail with errors like
# "Corrupted MAC on input", for example, set this to a non-zero value
# to have the rsync operation re-tried.
#
#rsync_numtries 0

# LVM parameters. Used to backup with creating lvm snapshot before backup
# and removing it after. This should ensure consistency of data in some special
# cases
#
# LVM snapshot(s) size (lvcreate --size option).
#
#linux_lvm_snapshotsize 100M

# Name to be used when creating the LVM logical volume snapshot(s).
#
#linux_lvm_snapshotname rsnapshot

# Path to the LVM Volume Groups.
#
#linux_lvm_vgpath   /dev

# Mount point to use to temporarily mount the snapshot(s).
#
#linux_lvm_mountpath    /path/to/mount/lvm/snapshot/during/backup

###############################
### BACKUP POINTS / SCRIPTS ###
###############################

# LOCALHOST
backup  /home/  User/
backup  /etc/   Root/
backup  /usr/local/ Root/
backup  /var/cache/apt/ Root/
backup  /etc/default/plexmediaserver    Root/
backup  /etc/init/plexmediaserver.conf  Root/
backup  /var/spool/anacron  Root/
#backup /var/log/rsnapshot      localhost/
#backup /etc/passwd localhost/
#backup /home/foo/My Documents/     localhost/
#backup /foo/bar/   localhost/  one_fs=1, rsync_short_args=-urltvpog
#backup_script  /usr/local/bin/backup_pgsql.sh  localhost/postgres/
# You must set linux_lvm_* parameters below before using lvm snapshots
#backup lvm://vg0/xen-home/ lvm-vg0/xen-home/

# EXAMPLE.COM
#backup_exec    /bin/date "+ backup of example.com started at %c"
#backup root@example.com:/home/ example.com/    +rsync_long_args=--bwlimit=16,exclude=core
#backup root@example.com:/etc/  example.com/    exclude=mtab,exclude=core
#backup_exec    ssh root@example.com "mysqldump -A > /var/db/dump/mysql.sql"
#backup root@example.com:/var/db/dump/  example.com/
#backup_exec    /bin/date "+ backup of example.com ended at %c"

# CVS.SOURCEFORGE.NET
#backup_script  /usr/local/bin/backup_rsnapshot_cvsroot.sh  rsnapshot.cvs.sourceforge.net/

# RSYNC.SAMBA.ORG
#backup rsync://rsync.samba.org/rsyncftp/   rsync.samba.org/rsyncftp/

Anacrontab dosyasında haftalık bir Anacron işi oluşturdum:

# /etc/anacrontab: configuration file for anacron

# See anacron(8) and anacrontab(5) for details.

SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
HOME=/root
LOGNAME=root

# These replace cron's entries
1   5   cron.daily  run-parts --report /etc/cron.daily
7   10  cron.weekly run-parts --report /etc/cron.weekly
@monthly    15  cron.monthly    run-parts --report /etc/cron.monthly
7   5   backup.weekly   rsnapshot weekly >> /media/siddharth/Backup/Backup/Logs/Anacron/log

Anacron'un bu işi hatasız çalışıp çalışmadığını nasıl test ederim?

Çoğu zaman oturum açmayacağım. Anacron'un test çalışmasını nasıl yaparım.

Yanıtlar:


15

Bir anakron işini zaman damgalarını yok sayarak 'zorla' çalıştırabilirsiniz ';

anacron -f

-nİsterseniz diğer seçenekler de kullanılabilir.

Gönderen man anacron:

 -f     Force execution of the jobs, ignoring the timestamps.

 -s     Serialize  execution  of jobs.  Anacron will not start a new job
              before the previous one finished.

 -n     Run  jobs  now.   Ignore  the  delay   specifications   in   the
              /etc/anacrontab file.  This options implies -s.

Günlükleri görüntüleyebilirsiniz /var/log/syslog.

Her iş için zaman damgası depolanır /var/spool/anacron.


Teşekkürler ! O mükemmel. Yedekleme işini beklendiği gibi çalıştırabiliyorum. Umarım bu cevap benim gibi pencerelerden ubuntu'ya göç eden diğer insanlara yardımcı olacaktır.
Siddharth Manthan

Not: Başka bir soru: bir bilgisayarda 24x7 çalışmayan haftalık işleri planlamak için cron veya anacron kullanılacak mı?
Siddharth Manthan

1
Kesinlikle Anacron
Ron

sudoKök olarak çalışmıyorsanız eklemeniz gerekir .
badjr
Sitemizi kullandığınızda şunları okuyup anladığınızı kabul etmiş olursunuz: Çerez Politikası ve Gizlilik Politikası.
Licensed under cc by-sa 3.0 with attribution required.