Git “sudo: apt-get: command not found” kurulumu

Git'i yüklemeye çalışıyorum. Aşağıdaki komutu çalıştırıyorum:

sudo apt-get install git-core git-gui git-doc

Ancak aşağıdaki hatayı alın: sudo: apt-get: command not found

Ne yapmalıyım?

Eğer CentOS 5 kullandığınız için, varsayılan paket yöneticisi olduğunu yum, değil apt-get. Kullanarak bir program yüklemek için normal olarak aşağıdaki komutu kullanırsınız:

$ sudo yum install <packagename>

Ancak, git'i bu şekilde yüklemeye çalışırken, CentOS 5'te aşağıdaki hatayla karşılaşırsınız:

$ sudo yum install git
Setting up Install Process
Parsing package install arguments
No package git available.
Nothing to do

Bu, sizi tanıyan paket havuzlarının yumkurmak için gerekli rpms'leri (RPM Paket Yöneticisi dosyaları) içermediğini söyler git. Muhtemelen bunun nedeni, CentOS 5’in 2007’de piyasaya sürülen RHEL 5’e dayanmasıdır git. Bu sorunu yumaşmak için, kullanılan listeye ek depolar eklememiz gerekir ( Bu talimatlara göre RPMforge deposunu ekleyeceğiz ).

Bu, i386 paketlerini istediğinizi varsayar. Çalıştırarak test edin uname -i. X86_64 paketlerini istiyorsanız, aşağıdaki komutlarda i386'nın tüm oluşumlarını x86_64 ile değiştirin

İlk önce, rpmforge-releasepaketi indirin:

$ wget http://packages.sw.be/rpmforge-release/rpmforge-release-0.5.3-1.el5.rf.i386.rpm

Ardından, paketi doğrulayın ve yükleyin:

$ sudo rpm --import http://apt.sw.be/RPM-GPG-KEY.dag.txt
$ rpm -K rpmforge-release-0.5.3-1.el5.rf.i386.rpm
$ sudo rpm -i rpmforge-release-0.5.3-1.el5.rf.i386.rpm

Ve şimdi yüklemeliyiz git:

$ sudo yum install git-gui

yumBağımlılıkları çözecek ve ilerlemek isteyip istemediğinizi size ilgili noktalarda soracaktır. yEvet için nveya veya returnHayır için basın .

Debian ile ilgili bir dağıtım kullanıyor musunuz? Değilse, YUM (günümüzde Red Hat, CentOS vb.), Portage, Entropy, RPM, vb. Gibi farklı bir paket yöneticisi kullanmanız gerekebilir.

Debian ile ilgili bir dağıtım kullanırken:

Sana ne veriyor?

$ command -V apt-get
apt-get is /usr/bin/apt-get

İkili gerçekten orada mı?

$ file /usr/bin/apt-get
/usr/bin/apt-get: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.18, stripped

Git'i kaynaklardan oluşturmak istiyorsanız, aşağıdakiler yardımcı olabilir. Noloader Github'dan senaryo yazıyorlar | Derleme-Scriptler . Bunları CentOS 5 ve MIPS ci20 dev board gibi eski işletim sistemlerinde kullanıyorum. Dağıtımlar artık depoları korumaz, bu nedenle yazılımı güncellemenin tek güvenilir yolu budur. Komut dosyaları, Solaris gibi yeni işletim sistemleri için de faydalıdır, çünkü Oracle güncellemeleri almak için bir servis sözleşmesi satın almanızı istemektedir.

İşte Git betiği. Bu sorunun cevabında bazı maddeler olduğundan emin olmak için buraya eklendi. Ancak bazı paketlerin en son sürümlerini almak için zaman zaman değiştirdiğim için GitHub'a geri dönmelisiniz.

#!/usr/bin/env bash

# See fixup for INSTALL_LIBDIR below
INSTALL_PREFIX=/usr/local
INSTALL_LIBDIR="$INSTALL_PREFIX/lib64"

# OpenSSH can only use OpenSSL 1.0.2 at the moment
OPENSSL_TAR=openssl-1.0.2l.tar.gz
OPENSSL_DIR=openssl-1.0.2l
#OPENSSL_TAR=openssl-1.1.0e.tar.gz
#OPENSSL_DIR=openssl-1.1.0e

ZLIB_TAR=zlib-1.2.11.tar.gz
ZLIB_DIR=zlib-1.2.11

BZ2_TAR=bzip2-1.0.6.tar.gz
BZ2_DIR=bzip2-1.0.6

READLN_TAR=readline-7.0.tar.gz
READLN_DIR=readline-7.0

UNISTR_TAR=libunistring-0.9.7.tar.gz
UNISTR_DIR=libunistring-0.9.7

ICONV_TAR=libiconv-1.15.tar.gz
ICONV_DIR=libiconv-1.15

IDN2_TAR=libidn2-0.16.tar.gz
IDN2_DIR=libidn2-0.16

PCRE_TAR=pcre-8.40.tar.gz
PCRE_DIR=pcre-8.40

PCRE2_TAR=pcre2-10.23.tar.gz
PCRE2_DIR=pcre2-10.23

CURL_TAR=curl-7.54.0.tar.gz
CURL_DIR=curl-7.54.0

GIT_TAR=v2.13.0.tar.gz
GIT_DIR=git-2.13.0

# Unset to avoid using an existing trust store when configuring cURL.
# No trust store will be supplied for some OSes, like Solaris.
# Also see '/usr/bin/curl-config --ca' and '/usr/bin/curl-config --configure'
USE_TRUST_STORE=1

###############################################################################

# Autotools on Solaris has an implied requirement for GNU gear. Things fall apart without it.
# Also see https://blogs.oracle.com/partnertech/entry/preparing_for_the_upcoming_removal.
if [[ -d "/usr/gnu/bin" ]]; then
    if [[ ! ("$PATH" == *"/usr/gnu/bin"*) ]]; then
        echo
        echo "Adding /usr/gnu/bin to PATH for Solaris"
        PATH="/usr/gnu/bin:$PATH"
    fi
elif [[ -d "/usr/swf/bin" ]]; then
    if [[ ! ("$PATH" == *"/usr/sfw/bin"*) ]]; then
        echo
        echo "Adding /usr/sfw/bin to PATH for Solaris"
        PATH="/usr/sfw/bin:$PATH"
    fi
elif [[ -d "/usr/ucb/bin" ]]; then
    if [[ ! ("$PATH" == *"/usr/ucb/bin"*) ]]; then
        echo
        echo "Adding /usr/ucb/bin to PATH for Solaris"
        PATH="/usr/ucb/bin:$PATH"
    fi
fi

###############################################################################

if [[ -z `which autoreconf` ]]; then
    echo "Some packages require autoreconf. Please install autoconf or automake."
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

if [[ -z `which msgfmt` ]]; then
    echo "Git requires msgfmt. Please install gettext."
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

###############################################################################

echo
echo "If you enter a sudo password, then it will be used for installation."
echo "If you don't enter a password, then ensure INSTALL_PREFIX is writable."
echo "To avoid sudo and the password, just press ENTER and they won't be used."
read -s -p "Please enter password for sudo: " SUDO_PASSWWORD
echo

###############################################################################

THIS_SYSTEM=$(uname -s 2>&1)
IS_DARWIN=$(echo -n "$THIS_SYSTEM" | grep -i -c darwin)
IS_LINUX=$(echo -n "$THIS_SYSTEM" | grep -i -c linux)
IS_CYGWIN=$(echo -n "$THIS_SYSTEM" | grep -i -c cygwin)
IS_MINGW=$(echo -n "$THIS_SYSTEM" | grep -i -c mingw)
IS_OPENBSD=$(echo -n "$THIS_SYSTEM" | grep -i -c openbsd)
IS_DRAGONFLY=$(echo -n "$THIS_SYSTEM" | grep -i -c dragonfly)
IS_FREEBSD=$(echo -n "$THIS_SYSTEM" | grep -i -c freebsd)
IS_NETBSD=$(echo -n "$THIS_SYSTEM" | grep -i -c netbsd)
IS_SOLARIS=$(echo -n "$THIS_SYSTEM" | grep -i -c sunos)

if [[ ("$IS_FREEBSD" -eq "1" || "$IS_OPENBSD" -eq "1" || "$IS_NETBSD" -eq "1" || "$IS_DRAGONFLY" -eq "1" || "$IS_SOLARIS" -eq "1") ]]; then
    if [[ !(-z `which gmake 2>/dev/null | grep -v 'no gmake'`) ]]; then
        MAKE=gmake
    else
        MAKE=make
    fi
else
    MAKE=make
fi

# Try to determine 32 vs 64-bit, /usr/local/lib, /usr/local/lib32 and /usr/local/lib64
# The Autoconf programs misdetect Solaris as x86 even though its x64. OpenBSD has
# getconf, but it does not have LONG_BIT.
IS_64BIT=$(getconf LONG_BIT 2>&1 | grep -i -c 64)
if [[ "$IS_64BIT" -eq "0" ]]; then
    IS_64BIT=$(file /bin/ls 2>&1 | grep -i -c '64-bit')
fi

if [[ "$IS_SOLARIS" -eq "1" ]]; then
    SH_KBITS=64
    SH_MARCH=-m64
    INSTALL_LIBDIR="$INSTALL_PREFIX/lib64"
    INSTALL_LIBDIR_DIR="lib64"
elif [[ "$IS_64BIT" -eq "1" ]]; then
    if [[ (-d /usr/lib) && (-d /usr/lib32) ]]; then
        SH_KBITS=64
        SH_MARCH=-m64
        INSTALL_LIBDIR="$INSTALL_PREFIX/lib"
        INSTALL_LIBDIR_DIR="lib"
    elif [[ (-d /usr/lib) && (-d /usr/lib64) ]]; then
        SH_KBITS=64
        SH_MARCH=-m64
        INSTALL_LIBDIR="$INSTALL_PREFIX/lib64"
        INSTALL_LIBDIR_DIR="lib64"
    else
        SH_KBITS=64
        SH_MARCH=-m64
        INSTALL_LIBDIR="$INSTALL_PREFIX/lib"
        INSTALL_LIBDIR_DIR="lib"
    fi
else
    SH_KBITS=32
    SH_MARCH=-m32
    INSTALL_LIBDIR="$INSTALL_PREFIX/lib"
    INSTALL_LIBDIR_DIR="lib"
fi

if [[ -z "$CC" ]]; then CC=`which cc`; fi

MARCH_ERROR=`$CC $SH_MARCH -x c -c -o /dev/null - </dev/null 2>&1 | grep -i -c error`
if [[ "$MARCH_ERROR" -ne "0" ]]; then
    SH_MARCH=
fi

echo
echo "********** libdir **********"
echo
echo "Using libdir $INSTALL_LIBDIR"

###############################################################################

echo
echo "********** zLib **********"
echo

wget "http://www.zlib.net/$ZLIB_TAR" -O "$ZLIB_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download zLib"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$ZLIB_DIR" &>/dev/null
tar -xzf "$ZLIB_TAR"
cd "$ZLIB_DIR"

SH_LDLIBS=("-ldl -lpthread")
SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure zLib"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build zLib"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** Bzip **********"
echo

wget "http://www.bzip.org/1.0.6/$BZ2_TAR" -O "$BZ2_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download Bzip"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$BZ2_DIR" &>/dev/null
tar -xzf "$BZ2_TAR"
cd "$BZ2_DIR"

# Fix Bzip install paths
cp Makefile Makefile.orig
sed 's|$(PREFIX)/lib|$(LIBDIR)|g' Makefile.orig > Makefile
rm Makefile.orig
cp Makefile-libbz2_so Makefile-libbz2_so.orig
sed 's|$(PREFIX)/lib|$(LIBDIR)|g' Makefile-libbz2_so.orig > Makefile-libbz2_so
rm Makefile-libbz2_so.orig

# Fix Bzip cpu architecture
cp Makefile Makefile.orig
sed "s|CFLAGS=|CFLAGS=$SH_MARCH |g" Makefile.orig > Makefile
cp Makefile Makefile.orig
sed "s|CXXFLAGS=|CXXFLAGS=$SH_MARCH |g" Makefile.orig > Makefile
rm Makefile.orig
cp Makefile-libbz2_so Makefile-libbz2_so.orig
sed "s|CFLAGS=|CFLAGS=$SH_MARCH |g" Makefile-libbz2_so.orig > Makefile-libbz2_so
cp Makefile-libbz2_so Makefile-libbz2_so.orig
sed "s|CXXFLAGS=|CXXFLAGS=$SH_MARCH |g" Makefile-libbz2_so.orig > Makefile-libbz2_so
rm Makefile-libbz2_so.orig

# Add RPATH
cp Makefile Makefile.orig
sed "s|LDFLAGS=|LDFLAGS=$SH_MARCH -Wl,-rpath,$INSTALL_LIBDIR -L$INSTALL_LIBDIR|g" Makefile.orig > Makefile
rm Makefile.orig
cp Makefile-libbz2_so Makefile-libbz2_so.orig
sed "s|LDFLAGS=|LDFLAGS=$SH_MARCH -Wl,-rpath,$INSTALL_LIBDIR -L$INSTALL_LIBDIR|g" Makefile-libbz2_so.orig > Makefile-libbz2_so
rm Makefile-libbz2_so.orig

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build Bzip"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install PREFIX="$INSTALL_PREFIX" LIBDIR="$INSTALL_LIBDIR")
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** Unistring **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.gnu.org/gnu/libunistring/$UNISTR_TAR" --no-check-certificate -O "$UNISTR_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download IDN"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$UNISTR_DIR" &>/dev/null
tar -xzf "$UNISTR_TAR"
cd "$UNISTR_DIR"

SH_LDLIBS=("-ldl -lpthread")
SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure IDN"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build IDN"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** Readline **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.gnu.org/gnu/readline/$READLN_TAR" --no-check-certificate -O "$READLN_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download Readline"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$READLN_DIR" &>/dev/null
tar -xzf "$READLN_TAR"
cd "$READLN_DIR"

SH_LDLIBS=("-ldl" "-lpthread")
SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure Readline"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build Readline"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** iConvert **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.gnu.org/pub/gnu/libiconv/$ICONV_TAR" --no-check-certificate -O "$ICONV_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download iConvert"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$ICONV_DIR" &>/dev/null
tar -xzf "$ICONV_TAR"
cd "$ICONV_DIR"

SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-ldl" "-lpthread")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure iConvert"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build iConvert"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** IDN2 **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://alpha.gnu.org/gnu/libidn/$IDN2_TAR" --no-check-certificate -O "$IDN2_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download IDN"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$IDN2_DIR" &>/dev/null
tar -xzf "$IDN2_TAR"
cd "$IDN2_DIR"

if [[ "$IS_SOLARIS" -eq "1" ]]; then
    cp src/idn2.c src/idn2.c.orig
    sed '/^#include "error.h"/d' src/idn2.c.orig > src/idn2.c
    cp src/idn2.c src/idn2.c.orig
    sed '43istatic void error (int status, int errnum, const char *format, ...);' src/idn2.c.orig > src/idn2.c
    rm src/idn2.c.orig

    echo "" >> src/idn2.c
    echo "static void" >> src/idn2.c
    echo "error (int status, int errnum, const char *format, ...)" >> src/idn2.c
    echo "{" >> src/idn2.c
    echo "  va_list args;" >> src/idn2.c
    echo "  va_start(args, format);" >> src/idn2.c
    echo "  vfprintf(stderr, format, args);" >> src/idn2.c
    echo "  va_end(args);" >> src/idn2.c
    echo "  exit(status);" >> src/idn2.c
    echo "}" >> src/idn2.c
    echo "" >> src/idn2.c
fi

SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-ldl" "-lpthread")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure IDN"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build IDN"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** OpenSSL **********"
echo

# wget on Ubuntu 16 cannot validate against Let's Encrypt certificate
wget "https://www.openssl.org/source/$OPENSSL_TAR" --no-check-certificate -O "$OPENSSL_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download OpenSSL"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$OPENSSL_DIR" &>/dev/null
tar -xzf "$OPENSSL_TAR"
cd "$OPENSSL_DIR"

# OpenSSL and enable-ec_nistp_64_gcc_128 option
IS_X86_64=$(uname -m 2>&1 | egrep -i -c "(amd64|x86_64)")
if [[ "$SH_KBITS" -eq "32" ]]; then IS_X86_64=0; fi

CONFIG=./config
CONFIG_FLAGS=("no-ssl2" "no-ssl3" "no-comp" "shared" "-DNDEBUG" "-Wl,-rpath,$INSTALL_LIBDIR"
        "--prefix=$INSTALL_PREFIX" "--openssldir=$INSTALL_PREFIX" "--libdir=$INSTALL_LIBDIR_DIR")
if [[ "$IS_X86_64" -eq "1" ]]; then
    CONFIG_FLAGS+=("enable-ec_nistp_64_gcc_128")
fi

KERNEL_BITS="$SH_KBITS" "$CONFIG" "${CONFIG_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure OpenSSL"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4 depend)
"$MAKE" "${MAKE_FLAGS[@]}"

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build OpenSSL"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install_sw)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** PCRE **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.pcre.org/pub/pcre/$PCRE_TAR" --no-check-certificate -O "$PCRE_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download PCRE"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$PCRE_DIR" &>/dev/null
tar -xzf "$PCRE_TAR"
cd "$PCRE_DIR"

SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-lz" "-ldl" "-lpthread")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --enable-pcregrep-libz --enable-pcregrep-libbz2 \
    --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure PCRE"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4 all)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build PCRE"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** PCRE2 **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://ftp.pcre.org/pub/pcre/$PCRE2_TAR" --no-check-certificate -O "$PCRE2_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download PCRE2"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$PCRE2_DIR" &>/dev/null
tar -xzf "$PCRE2_TAR"
cd "$PCRE2_DIR"

SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-lz" "-ldl" "-lpthread")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --enable-pcre2-8 --enable-pcre2-16 --enable-pcre2-32 \
    --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure PCRE2"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4 all)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build PCRE2"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** cURL **********"
echo

# https://savannah.gnu.org/bugs/?func=detailitem&item_id=26786
wget "https://curl.haxx.se/download/$CURL_TAR" --no-check-certificate -O "$CURL_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download cURL"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$CURL_DIR" &>/dev/null
tar -xzf "$CURL_TAR"
cd "$CURL_DIR"

SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-lidn2" "-lssl" "-lcrypto" "-lz" "-ldl" "-lpthread")

if [[ ("$IS_SOLARIS" -ne ")" && "$USE_TRUST_STORE" -ne "0") ]]; then
  CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --without-ca-bundle --with-ca-path=/etc/openssl/certs --enable-ipv6 \
    --with-nghttp2 --with-ssl="$INSTALL_PREFIX" \
    --with-libidn2="$INSTALL_PREFIX" --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"
else
  CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-shared --enable-ipv6 --with-nghttp2 --with-ssl="$INSTALL_PREFIX" \
    --with-libidn2="$INSTALL_PREFIX" --prefix="$INSTALL_PREFIX" --libdir="$INSTALL_LIBDIR"
fi

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure cURL"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(-j 4)
"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to build cURL"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

MAKE_FLAGS=(install)
if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** Git **********"
echo

# wget on Ubuntu 16 cannot validate against DigiCert certificate
wget "https://github.com/git/git/archive/$GIT_TAR" --no-check-certificate -O "$GIT_TAR"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to download Git"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

rm -rf "$GIT_DIR" &>/dev/null
tar -xzf "$GIT_TAR"
cd "$GIT_DIR"

"$MAKE" configure

if [[ "$?" -ne "0" ]]; then
    echo "Failed to make configure Git"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

# "Instruct Git to use pthread library?", http://stackoverflow.com/q/43080417/
for file in $(find `pwd` -iname 'Makefile*')
do 
    cp "$file" "$file.orig"
    sed 's|-lrt|-lrt -lpthread|g' "$file.orig" > "$file"
    rm "$file.orig"
done

# Various Solaris 11 workarounds
if [[ "$IS_SOLARIS" -eq "1" ]]; then
    for file in $(find `pwd` -iname 'Makefile*')
    do 
        cp "$file" "$file.orig"
        sed 's|-lsocket|-lnsl -lsocket|g' "$file.orig" > "$file"
        cp "$file" "$file.orig"
        sed 's|/usr/ucb/install|install|g' "$file.orig" > "$file"
        rm "$file.orig"
    done
    for file in $(find `pwd` -iname 'config*')
    do 
        cp "$file" "$file.orig"
        sed 's|-lsocket|-lnsl -lsocket|g' "$file.orig" > "$file"
        cp "$file" "$file.orig"
        sed 's|/usr/ucb/install|install|g' "$file.orig" > "$file"
        rm "$file.orig"
    done
fi

if [[ -e /usr/local/bin/perl ]]; then
    SH_PERL=/usr/local/bin/perl
elif [[ -e /usr/bin/perl ]]; then
    SH_PERL=/usr/bin/perl
else
    SH_PERL=perl
fi

SH_LDFLAGS=("$SH_MARCH" "-Wl,-rpath,$INSTALL_LIBDIR" "-L$INSTALL_LIBDIR")
SH_LDLIBS=("-lssl" "-lcrypto" "-lz" "-ldl" "-lpthread")

CPPFLAGS="-I$INSTALL_PREFIX/include -DNDEBUG" CFLAGS="$SH_MARCH" CXXFLAGS="$SH_MARCH" \
    LDFLAGS="${SH_LDFLAGS[@]}" LIBS="${SH_LDLIBS[@]}" \
    ./configure --enable-pthreads --with-lib="$INSTALL_LIBDIR" --with-openssl="$INSTALL_PREFIX" \
    --with-curl="$INSTALL_PREFIX" --with-libpcre="$INSTALL_PREFIX" --with-zlib="$INSTALL_PREFIX" \
    --with-iconv="$INSTALL_PREFIX" --with-perl="$SH_PERL" --prefix="$INSTALL_PREFIX"

if [[ "$?" -ne "0" ]]; then
    echo "Failed to configure Git"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

# See INSTALL for the formats and the requirements
MAKE_FLAGS=(-j 4 all)
if [[ ! -z `which asciidoc 2>/dev/null | grep -v 'no asciidoc'` ]]; then
    if [[ ! -z `which makeinfo 2>/dev/null | grep -v 'no makeinfo'` ]]; then
        MAKE_FLAGS+=("man")
    fi
    if [[ ! -z `which xmlto 2>/dev/null | grep -v 'no xmlto'` ]]; then
        MAKE_FLAGS+=("info" "html")
    fi
fi

"$MAKE" "${MAKE_FLAGS[@]}"

if [[ "$?" -eq "1" ]]; then
    echo "Failed to build Git"
    [[ "$0" = "$BASH_SOURCE" ]] && exit 1 || return 1
fi

# See INSTALL for the formats and the requirements
MAKE_FLAGS=(install)
if [[ ! -z `which asciidoc 2>/dev/null | grep -v 'no asciidoc'` ]]; then
    if [[ ! -z `which makeinfo 2>/dev/null | grep -v 'no makeinfo'` ]]; then
        MAKE_FLAGS+=("install-man")
    fi
    if [[ ! -z `which xmlto 2>/dev/null | grep -v 'no xmlto'` ]]; then
        MAKE_FLAGS+=("install-info" "install-html")
    fi
fi

if [[ ! (-z "$SUDO_PASSWWORD") ]]; then
    echo "$SUDO_PASSWWORD" | sudo -S "$MAKE" "${MAKE_FLAGS[@]}"
else
    "$MAKE" "${MAKE_FLAGS[@]}"
fi

cd ..

###############################################################################

echo
echo "********** Cleanup **********"
echo

# Set to false to retain artifacts
if true; then

    ARTIFACTS=("$OPENSSL_TAR" "$OPENSSL_DIR" "$UNISTR_TAR" "$UNISTR_DIR" "$READLN_TAR" "$READLN_DIR"
            "$PCRE_TAR" "$PCRE_DIR" "$PCRE2_TAR" "$PCRE2_DIR" "$ZLIB_TAR" "$ZLIB_DIR"  "$BZ2_TAR" "$BZ2_DIR"
            "$IDN2_TAR" "$IDN2_DIR" "$ICONV_TAR" "$ICONV_DIR" "$CURL_TAR" "$CURL_DIR" "$GIT_TAR" "$GIT_DIR")

    for artifact in "${ARTIFACTS[@]}"; do
        rm -rf "$artifact"
    done

    # ./build-git.sh 2>&1 | tee build-git.log
    if [[ -e build-git.log ]]; then
        rm build-git.log
    fi
fi

[[ "$0" = "$BASH_SOURCE" ]] && exit 0 || return 0

EĞER kullanmaya kararsudoşifreyi ardından düşünün Bash tarihini geçici olarak devre dışı şifre yapmadınız bu yüzden. Geçmişleri devre dışı bıraktım, böylece hassas bilgileri yanlışlıkla kaydetmem, bu benim için sorun değil.